application datasheet

application datasheet

Download sheet in pdf

80VT750 - TRASPARENTE 2K PER VETRO HS

View Product Shelf Life

FIELD OF APPLICATION:

Objects, cosmetics, furniture and handcrafts.

PREPARATION OF THE PRODUCT:

Before painting, clean the substrate thoroughly, possibly by glass flaming (an operation always recommended to improve adhesion). Comp. A 80VT750 100 Parts Comp. B 20VT750 20 Parts Diluent 820 60 - 80 Parts Retardant To eliminate any spreading defects, (peel, bubble formation, etc.) replace some of the 820 thinner with 10458P retardant. It is advisable to conduct preliminary tests to determine the right amount of retardant to use. Pigmentation 80VT750 glass paint can be colored with our P.EP series colored pastes (matte colors) at 40% maximum or our 50100M series coloring concentrates (transparent colors). It is very important to mix the dyes with the paint before catalysis in order to avoid possible precipitation of the dye.

APPLICATION:

Use airbrush with nozzles featuring a diameter of 1.4-1.5 mm and pressure of 2.5-4 atm. Suitable for application with electrostatic guns (also rotating cups).

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT:

Two-component;

APPEARANCE OF THE FILM:

Glossy

COLORS:

Clear

SPECIFIC WEIGHT:

1,07 kg/lt (±0,10)

CURING:

Drying: 2-3’   Baking: 25-30’ at 120 °C -140 °C   Baking: 15-20’ at 140 °C -160 °C   Baking: 10-15’ at 160 °C - 200 °C

RECOMMENDED LAYERS:

1 - 2 coats

POT-LIFE:

4 hours at 20 °C. The pot-life decreases at higher temperature

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room must be dry and with a temperature between +10 °C and +35 °C. Always close containers immediately after use. Rev.: 06/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.

Other products in Packaging cosmetico

 > Solvent-Based finishes

20044S

SHINY PAINT FOR ACETATE

Plastica

204.00021

MATT COLOURLESS SOFT TOUCH PAINT

Vernici Specialty
Leghe Plastica Vetro

340015

ACRYL-VINYL 1K CLEAR COAT

Vernici Specialty
Plastica

701.00015

CLEAR COAT GLOSS ACRYLIC 2K

Plastica
 > Water-based finishes

2205L00781

GLASSPLUS 2K WB SHINING PAINT

Leghe Metallo Vetro

2205M00095

GLASSPLUS 2K WB MATT PAINT

Leghe Metallo Vetro

ACQ590

WATER-BASED MATT CLEAR COAT 180°C GRINDED GLASS

Leghe Metallo Vetro

ACQ880.003

POLYTERM IDROTOP HIGHMATT WB 130°

Metallo Vetro
 > Primer

20023

2K ACRYLIC PRIMER

Plastica

20044A

SHINY PAINT

Vernici per Metalizzazione Sputtering PVD
Plastica Vetro

30099

PRIMER

Vernici per Metalizzazione Sputtering PVD Vernici Specialty
Leghe Metallo Plastica Vetro

66099

T-MOPLEN UV PRIMER

Leghe Metallo Plastica Vetro

K.713

ACRILGRIP SEMI-MATT

Leghe Metallo Plastica Vetro

K.719

MULTIGRIP

Leghe Metallo Plastica Vetro

PP603

PRIMER

Plastica
 > Water-based clear coats

ACQ187P

WATER-BASED GLASS 180°C GLASS PLUS

Leghe Metallo Vetro

ACQ560

GLASSCRYL 2K WB MATT PAINT HCR

Vetro

ACQ8370

GLASSCOAT CONVERTER 1K WB

Metallo Vetro

ACQ880

POLYTERM IDROTOP WB 130°

Metallo Vetro
 > Normal clear coats

02S0838L

PAINT WITH LIQUID ICE EFFECT

Vernici Specialty
Metallo Plastica Vetro

701.00020

ULTRALACK 2K GLOSS

Vernici per Metalizzazione Sputtering PVD
Leghe Metallo Plastica Vetro

704.00020

ULTRALACK 2K MATT

Leghe Metallo Plastica Vetro

80VT000

GLOSS PAINT FOR GLASS

Leghe Metallo Vetro

80VT500

MATT PAINT FOR GLASS

Leghe Metallo Vetro
 > UV clear coats

66UV298

UV CLEAR COAT POSTMETAL HR

Vernici per Metalizzazione Sputtering PVD Vernici UV Vernici Specialty
Leghe Metallo Plastica Vetro

UV3L0773

UV FINISH VACU.MET.

Vernici Specialty Vernici per Metalizzazione Sputtering PVD Vernici UV
Leghe Metallo Plastica Vetro

UV5L0255

UV TRASPARENT NI

Vernici Specialty Vernici UV
Plastica

UV8L0367

BASECOAT UV VAC.MET HR

Vernici Specialty Vernici UV Vernici per Metalizzazione Sputtering PVD
Plastica Vetro