Protective paint and glass decoration.
The surface to be painted must be free of contaminants. Glass flaming where needed.
Comp. A : ACQ560 100 parts by weight Comp. B : CZW707 30 parts by weight Mix well for few minutes until smooth, preferably with mechanical stirrer Diluent: Demineralized water 20 - 25 parts by weight For applications on glass, add 1-2% of ZW250 or Z.287 adhesion promoter. Coloring: ACQ560 paint can be colored with our 50100M / ZW300 / DY80xxx (transparent colors) max. 20%. It is very important to mix the dyes with the paint at the time of catalysis in order to avoid possible precipitation of the dye. For matte colors, use our PW series water-based pastes (25% max.), to be mixed with ACQ560 before catalysis.
Two-component;
Matte.
Clear
Drying - Print-free: 4-5 hours. 15’ at 25 °C Drying Min. 60’ – 50/60 °C Max. 10’ 200 °C
2 coats.
2 hours at 20 °C. The pot-life decreases at higher temperature
Strictly follow the instructions on the labeling and in the safety data sheet.
The storage room should be dry, not exposed to the sun and with a temperature between +10 °C and +30 °C. Always carefully close containers of CZW707 immediately after use. Once the package is opened, use within 5 days. It can react with atmospheric moisture. Rev.: 06/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB