Clearcoat 701.00015 is applied over a clean, dust-free matte base coat. The use of a dust-fixing cloth is recommended.
Comp. A : 701.00015 100 parts by weight or volume Comp. B : CZ.711 45 parts by weight or volume Diluent : D.737 / D.219 10 - 40 parts by weight or volume
Two-component;
Glossy
Clear
0,99 kg/l (± 0,02)
36” (±3) at 20 °C ASTM 4
42% (± 2)
Drying - Print-free: 4-5 hours. 10 – 15’ at A.T. Print-free 4 - 5 hours Forced Drying 45’ at 60-70 °C
A cross coat.
4 hours. The pot-life decreases at higher temperature.
40 - 50 µ It is possible to raise the baking temperature up to 90 °C, thus achieving maximum product hardness and strength.
Wet-on-wet or after 24 hours minimum. When the film has completely hardened, the surface to be painted must be lightly sanded.
Strictly follow the instructions on the labeling and in the safety data sheet.
The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB