204.00021 - VELLURE - VERNICE SOFT OPACA

FIELD OF APPLICATION:

Rubber-like tactile effect paint for applications in various fields (giftware, housewares, furniture, car parts, etc.).

PREPARATION OF THE SUBSTRATE:

Plastic materials: Treat with appropriate primers according to the type of plastic material (consult Vernici Caldart Laboratory). Iron substrates: Remove any traces of rust, then degrease and then treat with 190 series or 193 series epoxy primer to match. Aluminum: Screen with scotch-brite, then degrease and then treat with 190 series or 193 series epoxy primer to match.

PREPARATION OF THE PRODUCT:

Comp. A : 204.00021 100 parts by weight Comp. B : 20021 15 parts by weight Alternatively (1) : 20021 20 parts by weight Diluent : 421 10 - 20 parts by weight : 276 (2) 10 - 20 parts by weight (1) As a result of testing in our laboratories, 20% catalysis is recommended in the event that high chemical resistance is required and/or the object is exposed outdoors. (2) At temperatures above 25 °C, dilution with thinner 276 or the addition of retardant 10304R, in the amount of 5% to 10% calculated on Component "A," is recommended. Use only and exclusively the recommended thinners. The use of thinners other than those indicated may impair the crosslinking process and lead to incomplete film formation. In this case, poor hardness or, in extreme cases, permanent residual stickiness may occur.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Two-component;

APPEARANCE OF THE FILM

Matte.

COLORS

Clear

SPECIFIC WEIGHT

1,04 Kg/lt (± 0,02)

SUPPLY VISCOSITY

Thixotropic product

DRY RESIDUE (A)

52% (±2)

DRYING

Dry dust-free - Print-free: 4-5 hours. 15’ at 20 °C   Forced Drying 90’ at 50°C   Forced Drying 45’ at 80 °C

RECOMMENDED LAYERS

Two full coats

RECOMMENDED THICKNESS

50 - 60 µm dry

POT- LIFE at 20 °C

2 hours. The pot-life decreases at higher temperature

RECOATING:

Max within 1 to 2 hours at A.T. NOTE: Always carefully close 20021 containers immediately after use. Once the package is opened, use within 5 days. It can react with atmospheric moisture.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

To be stored in unopened packages, in dry storage room, out of sunlight and between +5 °C and +30 °C. Rev.: 05/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.