66099 - PRIMER 1K ALTA ADESIONE SAP.739281

PREPARATION OF THE SUBSTRATE:

For Polypropylene and other polyolefins, flaming or other suitable material pretreatment may be required. As such, always perform preliminary tests to assess its suitability. Cleaning and blowing for all other materials.

PREPARATION OF THE PRODUCT:

Component: 66099 ready to use

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Single-component.

APPEARANCE OF THE FILM

N.A.

COLORS

Clear

SPECIFIC WEIGHT

0,870 Kg/l (± 0,020)

SUPPLY VISCOSITY

13” (± 2) Astm4 at 20 °C

DRY RESIDUE

5% (± 1)

DRYING

by air

RECOMMENDED LAYERS

2 coats

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.