As colored primer/finish in the painting of metal substrates. Excellent adhesion, flexibility and chemical resistance. The varnish also offers excellent adhesion on glass after the addition of a suitable adhesion promoter. For coloring, use: · Concentrates 50100M / ZW300 / DY80xxx series (recommended max. ratio 100:25) · PW series pastes (recommended max. ratio 70:30) To be mixed before dilution with water
The substrate should be free of any kind of surface contaminants, (lubricant, traces of oxidation, residues of waxes or polishing pastes, residues of substances from galvanic baths, etc.) so it should be treated with appropriate cleaning methods.
Comp. A : ACQ8370 + Coloring Pastes or Concentrates 100 parts by weight Comp. B : Z.287 (adhesion promoter) 1 - 3 parts by weight Diluent: Demineralized water 50 - 70 parts by weight
Single-component.
Glossy
Clear
1,04 kg/lt (±0,02)
43% (±2)
Drying - Print-free: 4-5 hours. 10-15’ at 20 °C Forced Drying 30’ at 130-150 °C
A cross coat
Strictly follow the instructions on the labeling and in the safety data sheet.
The storage room should be dry, not exposed to the sun and with a temperature between +10 °C and +30 °C. Always carefully close containers immediately after use. Rev.: 06/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB