Product for general use, metal carpentry, agricultural machinery, metal furniture, machine tools. Resists overpainting with fast-drying water-based products Mixed cycles with solvent products are also possible.
Water-based one-component, fast-drying, acrylic and synthetic finishes
Iron surfaces: SA2 blasting or thorough mechanical cleaning followed by solvent washing. If the substrate is cleaned with water-based cleaning solutions, it is advisable to carry out rinsing to prevent any traces of surfactants from impairing the adhesion of the dried film.
Mix thoroughly until the color and consistency are uniform. Dilute, depending on the system and application conditions, 10% to 20% by weight with water to a viscosity of 30"- 40" FORD 4 at 20°C.
Primer 1K WB
Matt
Grey RAL 7035
1,40 Kg/lt (± 0,05)
25” (± 5) DIN 8 at 25 °C SOLID % - VOLUME 45% (± 2%) SOLID % - WEIGHT 61% (± 2%)
Dry dust-free - Print-free: 4-5 hours. 15’ - 20’ - Touch-free 2 - 3 hours - Complete curing 8 - 12 hours - Forced Drying 30’ - 40’ at 60°C - 70°C
1 (cross layers)
40 - 50 µm
9,1 m2/lt or 6,5 m2/kg at 50 µm dry
View pictograms Page 1.
After 4 hours minimum
Water-based products must be protected from frost. Strictly follow the instructions on the labeling and in the safety data sheet.
The storage room should be dry, out of sunlight and with a temperature between +10 °C and +30 °C. Rev.: 01/24 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
792.70701
ANCHOR GRIGIO - FONDO ACRILICO 2K
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB