594.70055 - NITROFLEX

FIELD OF APPLICATION:

Used by spraying as an insulating primer for spot repairs of small surfaces and partial restoration of cars or industrial vehicles. It should be applied on polyester filler or primer and on suitably prepared old paints, except for those with synthetic and thermoplastic base.

PREPARATION OF THE PRODUCT:

Mix thoroughly until the color and consistency are uniform. Dilute with our nitro thinner D.525 up to the desired viscosity.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Nitro insulting primer 1K

APPEARANCE

Matt

COLOUR

Grey (approx. RAL7035)

SPECIFIC WEIGHT

1,37 Kg/l (± 0,10)

SUPPLY VISCOSITY

23” DIN 8 at 25 °C (±4”) SOLID % - VOLUME 38% (± 2%) SOLID % - WEIGHT 60% (± 2%)

DRYING TIME AT 20 °C:

Air: 2-3 hours depending on the thickness obtained   Oven: 20’ at 60 °C

RECOMMENDED LAYERS:

2 - 3 coats

RECOMMENDED – DTM:

50 - 80 µm

THEORETICAL YIELD:

7,6 m2/Lt or 5,5 m2/Kg at 50 µm dry

APPLICATION INSTRUCTIONS:

View pictograms Page 1.

RECOATING:

After 2-3 hours depending on thickness

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

In unopened and sealed packages, kept at a temperature of +5 to +30 °C. Rev.: 01/24 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.