193.R7042 - EPOFLEX ZINC - FONDO EPOX ANTICORR.

FIELD OF APPLICATION:

Anti-corrosive primer of universal type, applicable on: Iron, Copper, Aluminum, Galvanized Iron, Fiberglass, and Light Alloys.

RECOMMENDED FINISHES:

Epoxy – Polyurethane and Acrylic finishes

PREPARATION OF THE SUBSTRATE:

Iron surfaces: SA2 sandblasting, or thorough mechanical cleaning followed by degreasing with solvents. Hot-dip Galvanized Steel : Light sandblasting or sanding or, alternatively, buffing, followed by degreasing with solvent. Aluminum : Mechanical cleaning by sandblasting (where possible) sanding or buffing followed by degreasing with solvents. Copper and Brass : Remove any traces of oxidation by sanding or buffing followed by degreasing with solvents. Abs And Thermosetting Resins : Degreasing with solvents. PP : Flaming

PREPARATION OF THE PRODUCT:

Comp. A: 193.R7042 100 parts by weight or 3 parts by Volume Comp. B: CZ.105 / CZ.110 / CZ.155 20 parts by weight 1 part by Volume Thinner D.150 Standard 5 - 20 parts by weight Thinner D.160 Fast For large surfaces and/or cabin temperature > 30 °C, we recommend D.130 Slow thinner, which ensures excellent spreading and reabsorption Over spray. Mix to uniform consistency and color; dilute with our D.150 epoxy thinners to a viscosity of 20"- 0 "Ford 4 at 20 °C depending on the application system and/or thickness to be achieved. Applicable with conventional spray, Airmix and Airless systems.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Epoxy primer 2K

APPEARANCE

Matt

COLOUR

Grey RAL 7042

SPECIFIC WEIGHT (Comp.A)

1,62 Kg/l (± 0,05)

SUPPLY VISCOSITY

27’ ±4 DIN 8 at 25 °C SOLID % - VOLUME (A+B) 56% (± 2) SOLID % - WEIGHT (A+B) 72% (± 2) V.O.C. 2004/42/CE-IIB (c)(540)540

DRYING TIME AT 20 °C.

Dry dust-free - Print-free: 4-5 hours. 15 – 20’ - Drying 24 – 36 hours at 20 °C. - Forced Drying 30’ - 40’ at 60 - 80 °C.

RECOMMENDED LAYERS

1 (cross layers)

RECOMMENDED - DFT

40 - 50 µm

THEORETICAL YIELD

7,6 m2/Kg-11,1 m2/Lt at 50 µm dry

POT- LIFE AT 20 °C

6 hours

APPLICATION INSTRUCTIONS:

View pictograms Page 1.

OVERPAINTING:

With CZ.105: minimum 4-6 hours maximum 36 hours. With CZ.110: minimum 3-4 hours maximum 24 hours. Data referred to standard application (60mic) at 25 °C and 50% RH. After 48 hours, light sanding of the film is recommended to ensure good adhesion of the top coat.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

In unopened and sealed packages, kept at a temperature of +5 to +30 °C. Rev.: 01/24 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.