194.70330 - EPOZINC - ZINCANTE EPOX BICOMPONENTE

View Product Shelf Life

FIELD OF APPLICATION:

Anticorrosive primer with cathodic protection effect for steel.

RECOMMENDED FINISHES:

Wide compatibility with epoxy primers and intermediates.

PREPARATION OF THE SUBSTRATE:

Iron surfaces: SA2.5 sandblasting.

PREPARATION OF THE PRODUCT:

Comp. A: 194.70330 100 parts by weight Comp. B: CZ.105 or CZ.110 10 parts by weight Mix until uniform consistency and color; dilute with our D.150 epoxy thinner to a viscosity of 20-22 Ford 4 at 20 °C.

APPLICATION:

Spray: Use nozzles of 1.4-1.8 mm and pressure of 4-5 atm. Brush/Roll: Dilute with D.150 until well distended.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Epoxy zinc primer 2K

APPEARANCE

Matt

COLOUR

Gray

SPECIFIC WEIGHT (Comp.A)

2,90 Kg/L(± 0,05)

SUPPLY VISCOSITY

Thixotropic SOLID % - VOLUME (A+B) 54% (± 2) SOLID % - WEIGHT (A+B) 82% (± 2)

DRYING TIME AT 20 °C.

Dry dust-free - Print-free: 4-5 hours. 15’ – 20’   Drying 24 – 36 hours   Forced Drying 30’ - 40’ at 60 - 80 °C

RECOMMENDED LAYERS

1 (cross layers)

RECOMMENDE - DFT

60 - 80 µm

THEORETICAL YIELD

3,9 m2/Kg – 9,1 m2/Lt at 60 µm dry

POT- LIFE AT 20 °C

6 hours.

APPLICATION INSTRUCTIONS:

View pictograms Page 1.

OVERPAINTING:

With hardener CZ.105: minimum 4 hours maximum 36 hours. With hardener CZ.110: minimum 2 hours maximum 24 hours.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 01/24 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.