794.90901 - LANDER - FONDO ACRILICO RIEMP. BIANCO

NATURE OF PRODUCT:

Filler primer based on acrylic resins and isocyanate adduct to be mixed at the time of use.

FIELD OF APPLICATION:

General-purpose industrial acrylic filler primer: machine tools, metalwork, industrial bodywork, plastics. It can be used directly on the substrate, as it offers excellent general adhesion. Excellent dry sandability.

PREPARATION OF THE SUBSTRATE:

Iron surfaces: SA2 sandblasting, or degreasing with solvents followed by thorough sanding. Aluminum: Light sandblasting, alternatively sanding or thorough buffing with Scotch-Brite followed by degreasing with solvent. Fiberglass; PUR: Degreasing with solvents followed as needed by sanding. PVC/ABS: Degreasing with suitable solvents. PA6 - GF30 (1): Flaming or, degreasing with solvent followed by sanding if necessary. (1) Given the wide variety of composites on the market, preliminary testing is always recommended before moving to large-scale production.

PREPARATION OF THE PRODUCT:

Thoroughly mix component A until the color and consistency are uniform. Then mix with component B in the ratio shown below. By weight Volume Comp. A: 794.90901 100 parts 5 parts Comp. B: CZ.265 13 parts 1 part Dilute the perfectly blended mixture with 20-30% of our D.219 or D.737 thinners to the desired viscosity.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Two-component;

APPEARANCE OF THE FILM

Matte.

COLORS

White

DENSITY (Comp. A)

1,63 Kg/l (± 0,05)

SUPPLY VISCOSITY

38” (± 6”) DIN 8 at 25 °C

SOLID CONTENT (Comp. A)

77% (± 2%)

DRYING

Dry dust-free - Print-free: 4-5 hours. 10’ at 15 °C - 25 °C   - Forced Drying 30’ - 40’ at 70 °C

RECOMMENDED LAYERS

Two - three

RECOMMENDED THICKNESS

40-90 µm dry

POT- LIFE AT 20 °C

2h. The pot-life decreases at higher temperatures.

THEORETICAL YIELD

8,9 m2/lt or 5,9 m2/kg at 60 µm dry.

RECOATING:

Wet-on-wet or after drying, after light sanding of the film to ensure good adhesion of the top coat.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.