Decorative enamel for furniture, fixtures, metalwork, etc.
Iron surfaces: Thoroughly remove all traces of rust, calamine, grease and moisture. Old paints with poor adhesion should be removed by sanding. Apply 1 or 2 coats of single-component primer (see our 490 or 494 series). After about 24 hours, apply the enamel finish by brush. Galvanized and aluminum surfaces: Degrease and scour with scotch brite and then apply a suitable primer such as our MONOFLEX 994, or 2K EPOXY PRIMER 190 or 193. Wood surfaces: On new wood, apply one or two coats of polyurethane primer or other suitable primer. After the primer dries, sand thoroughly with sandpaper and then apply one or two coats of finishing enamel.
Comp. A: K.644 + Coloring pastes 100 parts by weight Diluent: D.434 or D.636 3 - 15 parts by weight
By brush, by roller by spray.
Single-component.
Micaceous matte
On request
1,40 Kg/lt (± 0,05)
25” (± 4) DIN 8 at 25 °C
73% (± 2%)
Dry dust-free - Print-free: 4-5 hours. 1h – 2h - Print-free 7h – 8h - Complete Curing 24h – 36h
1 - 2 coats
50 - 60 µm
10,6 m2/lt or 7,6 m2/kg at 50 µm dry
After 24 hours minimum. For product obtained by industrial dyeing, repaint wet-on-wet or within 4 to 6 hours, or 1/2 weeks after the first coat. Use white spirit-based thinners or those low in aromatic solvents.
Strictly follow the instructions on the labeling and in the safety data sheet.
The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
Administrative headquarters and Eyewear
Cosmetic Packaging Division
Via dell'industria, 21
20882 Bellusco (MB) - Italy
+ 39 039 684 08 50 / 53
Industry / Car Refinish Division
Via 1° maggio, 22 - Località Cagnano
36026 Pojana Maggiore (VI) - Italy
+ 39 044 476 44 15
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB
