General use, machine tools, industrial machinery, agricultural machinery.
View in the preparation of the support
Iron surfaces: Remove any traces of rust, grease, calamine and humidity by means of thorough mechanical cleaning, followed by degreasing. Apply one coat of our EPOXY 2K Primer series 193 or 190, our SINTOFLEX series 494 or 490. After 6/12 hours apply NITRO enamel. Aluminum: Degreasing with organic solvents, followed by sanding. Apply a coat of EPOXY 2K Primer (series 193 or 190) or acrylic primer 793.70701. Galvanized sheet: Apply a coat of Epoxy primer 193.
Mix until the color and consistency are uniform. Dilute with our nitro thinner D.525, up to a viscosity of 14” - 16” Ford 4 at 20 °C.
Nitro-Synthetic 1K
Glossy
Silver
0,98 Kg/l (± 0,10)
13’ DIN 8 at 20 °C (± 2”) SOLID % - VOLUME 33% (± 2%) SOLID % - WEIGHT 39% (± 2%) V.O.C. 2004/42/CE-IIB (e)(840)840
Dry dust-free: 10’ - 15' Touch-free: 2 - 3 hours Complete curing: 24 h
Two/three coats
30 - 40 µm
7,7 m2/Kg-Lt at 40 µm dry
After 1- 2 hours with the same product
View pictograms Page 1.
Strictly follow the instructions on the labeling and in the safety data sheet.
In unopened and sealed packages, kept at a temperature of +5 to +30°C. Rev.: 01/24 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB