Fast-drying synthetic finish based on alkyds.
Industrial carpentry, steel products, agricultural machinery, silos, etc.
Iron surfaces: Remove any traces of rust, grease, calamine and humidity by means of thorough mechanical cleaning, followed by degreasing. Apply a coat of our SINTOFLEX - 494 or 490 series. After 6-12 hours apply fast drying enamel. Aluminum: Sanding followed by degreasing with organic solvents. Apply a coat of epoxy primer 193 or 190, or acrylic 793. Galvanized sheet: Sand lightly or scour, degrease with solvent, and then apply a coat of 193 epoxy primer, or 793 acrylic.
Comp. A: K.431 + Coloring Pastes 100 parts by weight Diluent (1): D.434 or D.525 15 – 20 parts by weight Mix until the color and consistency are uniform. Dilute to the desired viscosity. (1) For ambient temperatures ? of 25 °C, only synthetic thinner D.434 should be used.
Single-component.
Glossy
By choice
1,25 Kg/l (± 0,05)
14” (± 3) DIN 8 at 25 °C
63% (± 3%)
Dry dust-free - Print-free: 4-5 hours. 20’ – 30’ - Print-free 4 – 5 hours - Forced Drying 30’ at 60 °C
A cross coat
40 - 50 µm (2)
9,7 m2/lt or 7,7 m2/kg at 50 µm dry
Wet-on-wet or max within 2 hours at 20 °C (2) Do not exceed the recommended thicknesses to avoid compromising the regular curing of the film. (3) In 75/25 ratio with P.900.
Strictly follow the instructions on the labeling and in the safety data sheet.
The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
Administrative headquarters and Eyewear
Cosmetic Packaging Division
Via dell'industria, 21
20882 Bellusco (MB) - Italy
+ 39 039 684 08 50 / 53
Industry / Car Refinish Division
Via 1° maggio, 22 - Località Cagnano
36026 Pojana Maggiore (VI) - Italy
+ 39 044 476 44 15
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB
