application datasheet

application datasheet

Download sheet in pdf

701.TIX10 - TIXOCLEAR - ACRILICO 2K LUCIDO

View Product Shelf Life

PREPARATION OF THE SUBSTRATE:

Clearcoat 701.TIX10 should generally be applied over a clean, dust-free matte base coat. The use of a dust-fixing cloth is recommended.

PREPARATION OF THE PRODUCT:

Comp. A: 701.TIX10 100 parts by Volume Comp. B (*): CZ.760 (Standard) 40 parts by Volume CZ.770 (Fast) 40 parts by Volume Alternatively: CZ.711 (Standard) 50 parts by Volume CZ.700 (Slow) 50 parts by Volume Mix component A with stirrer (if possible) until completely homogenized. Possible thixotropic structure of the paint is not an indication of altered quality. The thixotropy index may also differ slightly from batch to batch depending on the storage time elapsed before use. (*) Hardener and thinner should be chosen according to environmental conditions and the size of the piece. After catalysis, thin the mixture with 5-10% of our acrylic thinner D.737 (Standard), or D.727 (Slow). For high cabin temperatures (> 28 °C - 30 °C) and/or extensive surface applications, we recommend adding to the paint 3% - 5% of retardant 10304R. Also applicable with electrostatic systems; in this case, prefer D.727 (Slow).

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Two-component;

APPEARANCE OF THE FILM

Glossy

COLORS

Clear

SPECIFIC WEIGHT

0,99 Kg/l (± 0,05)

SUPPLY VISCOSITY (1)

50" (± 5") ASTM 4 at 20 °C.

DRY RESIDUE (A)

45% (± 2%)

DRYING

Dry dust-free - Print-free: 4-5 hours. 10’ - 15’ at 20 °C   Print-free 5 - 6 hours at 20 °C.   Forced Drying 40’ at 60 - 70 °C.

RECOMMENDED LAYERS

Two full coats with 10/’15' flash off between the 2 coats.

RECOMMENDED THICKNESS

40– 50 micron dry

THEORETICAL YIELD

8,3 m2/Lt or Kg at 50 micron dry

POT- LIFE AT 20 °C

2 hours. The pot-life decreases at higher temperatures It is possible to raise the baking temperature up to 90 °C, thus achieving maximum product hardness and strength. (1) Viscosity values refer to freshly produced paint. During storage this value may increase by as much as several units, this increase depends on the storage time from the temperature conditions of the storage and any temperature changes experienced by the paint during transport. Changes in viscosity up to a maximum of 30% of the initial value are to be considered normal and do not affect the quality of the product in any way.

THIXO TRANSPARENT GLOSS CUTS:

RATIO: 704.TIX40 / 701.TIX10

CATALYSIS (%) BRILLIANCE

704.TIX40 701.TIX10 CZ.760 (gloss at 60°) 100 0 33 4.5 +/- 1 90 10 33 23 +/- 2 75 25 33 40 +/- 2 66 33 33 56 +/- 3 50 50 36 76 +/- 3 33 66 40 82 +/- 4 25 75 40 87 +/- 4 0 100 40 93 +/- 4 N.B.: Sprayed gloss reading: 2 cross coats catalyzed on leneta A2 black primer. Baking 10' 80 °C.

TEST QUV PANEL (ASTM G154 cycle 2):

Spray application to a sheet metal with primer and BC/aluminum. Mixture preparation by weight Standard process 701.TIX10 100 CZ.760 40 D.737 10 Baking 10’ A.T. + 1 hour at 60 °C Aging specimen 12 days A.T. Total thickness (?) 100 Final gloss (gloss at 60°) 101 +/- 1 Brilliance after 360 hours QUV test 99.5 +/- 0.4 ?E after 360 hours QUV test 1,14 CIELab

BUCHHOLZ Hardness Test BH2000 (EN ISO NF 2815-2003):

Mixture preparation by weight Standard process 701.TIX10 100 CZ.760 40

APPLICATION ON THICK GLASS: 150 ? WET

Flash off 20’ at A.T. Baking 45’ at 70 °C Hardness (BH) after baking 60 Hardness (BH) after 1 day 85 Hardness (BH) after 7 days 101 Casting Limit (? Wet) 125 – 150

XENON TEST (EN ISO 11341:2005):

Spray application to a carbon fiber specimen. Mixture preparation by weight Standard process 701.TIX10 100 CZ.760 40 D.737 10 Baking 10’ A.T. + 1 hour at 70 °C Aging specimen 12 days A.T. Total thickness (?) 100 Final gloss (gloss at 60°) 93 +/- 1 Brilliance after 2500 hours XENON TEST 87.4 +/- 0.4 ?E after 2500 hours XENON TEST 0,52 CIELab

RECOATING:

Wet-on-wet after 15’/20 flash off or after complete curing after sanding with P400.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room must be dry and with a temperature between +10 °C and +30°C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.

Other products in FINITURE

 > QUICK AIR DRY ENAMELS

431.IC105

SINTOFAST RED FRAMES IC.105

431.IC194

SINTOFAST WHITE IC.194

431.IC444

SINTOFAST GREY FRAMES IC.444

434.IC444

MATT GREY CHASSIS IC.444

434W90000

BASIC WHITE 5 GLOSS

 > NITRO-CELLULOSE ENAMELS

531.90900

NITROFAST GLOSS

531.91100

NITROFAST GLOSS

533.90900

NITROFAST MATT

533.91100

NITROFAST MATT

571.70300

NITROLUX

 > MICACEOUS ENAMELS

644.70500

MICALUX BRUSH Metal Grey

644.70600

MICALUX BRUSH Base Grey

644.70700

MICALUX BRUSH LONDON SLATE GREY

644.70701

MICALUX BRUSH GUNMETAL GREY

644.70702

MICALUX BRUSH Pewter Grey

644.70703

MICALUX BRUSH LONDON SMOKE GREY

644.70704

MICALUX BRUSH Cast Iron Grey

644.70705

MICALUX BRUSH CHARCOAL GREY

944.70701

MICALUX ONE COAT GUNMETAL GREY

Leghe Metallo
 > BASE COATS

374.00199

BC TOYOTA 199 - SILVER

374.040

BC TOYOTA 040 - SUPER WHITE

374.1E0

BC TOYOTA 1E0 - DARK GREY MICA

374.2431

BC FORD 6.1/2431 - MONDUST SILVER

374.2851

BC FORD 2851 - BLACK PANTHER

374.BMW354

BC BMW 354 - MET. TITANSILBER

374.D69

BC RENAULT D69 - GRIS PLATINE

374.DB744

BC DB.744 - BRILLANT SILVER

374.DB761

BC DB.761 - MET. POLARISSILBER

374.EZR

BC CITROEN EZR - GRIS ALLUM.

374.F0249

BC FIAT 249/96 - WHITE

374.F0348

BC FIAT 348 - MET. SILVER GREY

374.F0589A

BC FIAT 589/A - DEEP SILVER GREY

374.F0595A

BC FIAT 595/A - FLAWLESS GREY

374.F0601

BC FIAT 601 - BLACK

374.F0602A

BC FIAT 602/A - ALUMINIUM

374.F0612A

BC FIAT 612/A - ELISA GREY

374.F0632

BC FIAT 632 - MET. BLACK

374.F0647F

BC FIAT - FINE-GRAINED STEEL GREY

374.F0647G

BC FIAT - COARSE-GRAINED STEEL GREY

374.F0695

BC FIAT 695 GREY MET

374.F0891B

BC FIAT 891/B - MET. PROVOCATIVE BLACK

374.F268/A

BC FIAT 268/A - SUPER WHITE

374.F296/A

BC FIAT 296 - WHITE

374.F565/A

BC FIAT 565/A - MET. ALLEGRO GREY

374.F599/A

BC FIAT 599/A - MET. MAGNETIC BLUE

374.F876/B

BC FIAT 876/B - MET. CARBON BLACK

374.GM157

BC OPEL - STARSILBER LII MET. GREY

374.LC9Z

BC VOLKSWAGEN LC9Z - PEARL BLACK

374.LY7W

BC VOLKSWAGEN - MET. LICHTSILBER

374.LY9C

BC VOLKSWAGEN LY9C - IBISWEISS

374.R369

BC RENAULT 369 - BLANC GLACIER

374.R676

BC RENAULT 676 - NOIR NACRE

374.VWA7W

BC VOLKSWAGEN A7W - REFLEXSILBER

 > ACRYLIC-POLYESTER ENAMELS

7H1.F0210

ELITE UHS

7H1.F0249

ELITE UHS

7H1.F0601

ELITE UHS

7H1.F268/A

ELITE UHS

7H1.F296/A

ELITE UHS

7H1.IC194

ELITE UHS

7H1.R369

ELITE UHS RENAULT 369 BLANC GLACIER

 > DIRECT ADHESION ACRYLIC ENAMELS

711.90900

ACRILGRIP GLOSS WHITE

Leghe Metallo Vetro

719.90900

MULTIGRIP - BASE WHITE ACRYLIC

Leghe Metallo Vetro
 > CLEAR COATS

41M02980

VERCAFLEX UNOMATT 1 GLOSS

Vernici Specialty
Plastica

701.00322

ULTRALACK 2K TRASP. LUC. ALTA ADES.

701.00701

CLEAR DROP - ACRYL TOP 2K

704.TIX40

TIXOCLEAR - 2K MATT ACRYLIC

Carbonio

709.TIX90

TIXOFILLER - 2K GLOSS ACRYLIC CLEAR COAT

Carbonio
 > WATER-BASED CLEAR COATS

701W00002

ACQUACLEAR 2K GLOSS

Metallo Plastica

704W00004

ACQUACLEAR 2K MATT

Metallo Plastica Vetro