application datasheet

application datasheet

Download sheet in pdf

27M01107 - PRIMER 2K ACRILICO OPACO HAHR

View Product Shelf Life

PREPARATION OF THE SUBSTRATE:

Plastic materials: Cleaning/Degreasing, tumbling if and where necessary.

PREPARATION OF THE PRODUCT:

Comp. A : 27M01107 100 parts by weight Comp. B : 20102 15 parts by weight Diluent : 274 70 - 80 parts by weight In special cases, to eliminate distension defects, peel or bubbles, 5-10% of 10304R retardant should be added. Note: do not change the dilution or use other thinner unless after agreement with Vernici Caldart Laboratory.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Two-component;

APPEARANCE OF THE FILM

Matte.

COLORS

Clear

SPECIFIC WEIGHT

1,00 Kg/l (± 0,02)

DRY RESIDUE

35% (±2)

VISCOSITY

40” ±2 ASTM F4 at 20 °C

DRYING

Dry dust-free - Print-free: 4-5 hours. 30 - 40' at 20 °C   Forced Drying 60’ at 60 °C ±5 °C

RECOMMENDED LAYERS

A cross coat

POT-LIFE at 20 °C

4 hours. The pot-life decreases at higher temperature.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room should be dry, not exposed to the sun and with a temperature between +10 °C and +30 °C. Always carefully close 20102 containers immediately after use; once the package is opened, use within 5 days. It can react with atmospheric moisture. Rev.: 06/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.

Other products in Occhialeria

 > Primer

20023.A01

HIGH ADHESION 2K ACRYLIC PRIMER

Plastica

30099

PRIMER

Vernici per Metalizzazione Sputtering PVD Vernici Specialty
Leghe Metallo Plastica Vetro

80179

MEMORY PRIMER

Vernici Specialty
Metallo

OPM001

PRIMER FOR METALS 150°

Leghe Metallo Vetro
 > Special products

02S0838L

PAINT WITH LIQUID ICE EFFECT

Vernici Specialty
Metallo Plastica Vetro
 > Enamels

64050

TRANSPARENT ONE-COMPONENT BASE

Plastica

889008

MATT BLACK EPOXY ENAMEL

Leghe Metallo Vetro
 > Clear Coats

20023

2K ACRYLIC PRIMER

Plastica

20044S

SHINY PAINT FOR ACETATE

Plastica

20070LX

POLIURETHAN PAINT

Vernici Specialty
Plastica

20095A

MEDIUM SOLID SHINY PAINT

Plastica

203826

XIA SHINY PAINT

Plastica

22L00501

ACRYLIC 1K METAL TOPCOAT LT HC V2

Metallo

22M05836

MATT ACRYLIC 1K METAL TOPCOAT LTHC

Metallo

250020ST

MATT TWO-COMPONENT PAINT

Plastica

29189SA

MATT PAINT

Plastica

4108M02767

COLORLESS SOFT MATT PAINT NR ETV4

Vernici Specialty
Plastica

41M02980

VERCAFLEX UNOMATT 1 GLOSS

Vernici Specialty
Plastica

4608M06114

1K HIGHTERM SOFT TOUCH V2

Vernici Specialty
Metallo

820006

MATT EPOXY CLEAR COAT

Leghe Metallo Vetro

820011

GLOSS EPOXY CLEAR COAT

Leghe Metallo Vetro

OPM101

CHROMALUX SILVER

Vernici Effetto Cromo e Riproduzione Effetto Galvanico
Leghe Metallo Plastica Vetro