27M01107 - PRIMER 2K ACRILICO OPACO HAHR

PREPARATION OF THE SUBSTRATE:

Plastic materials: Cleaning/Degreasing, tumbling if and where necessary.

PREPARATION OF THE PRODUCT:

Comp. A : 27M01107 100 parts by weight Comp. B : 20102 15 parts by weight Diluent : 274 70 - 80 parts by weight In special cases, to eliminate distension defects, peel or bubbles, 5-10% of 10304R retardant should be added. Note: do not change the dilution or use other thinner unless after agreement with Vernici Caldart Laboratory.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Two-component;

APPEARANCE OF THE FILM

Matte.

COLORS

Clear

SPECIFIC WEIGHT

1,00 Kg/l (± 0,02)

DRY RESIDUE

35% (±2)

VISCOSITY

40” ±2 ASTM F4 at 20 °C

DRYING

Dry dust-free - Print-free: 4-5 hours. 30 - 40' at 20 °C   Forced Drying 60’ at 60 °C ±5 °C

RECOMMENDED LAYERS

A cross coat

POT-LIFE at 20 °C

4 hours. The pot-life decreases at higher temperature.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room should be dry, not exposed to the sun and with a temperature between +10 °C and +30 °C. Always carefully close 20102 containers immediately after use; once the package is opened, use within 5 days. It can react with atmospheric moisture. Rev.: 06/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.