K.431 - SINTOFAST IND.LE LUC. - SMALTO R.E.

NATURE OF PRODUCT:

Fast-drying synthetic finish based on alkyds.

FIELD OF APPLICATION:

Fast-drying industrial gloss finish for painting industrial carpentry, metalwork of various kinds, machine tools, agricultural machinery, silos, etc.

Fast-drying industrial gloss finish for painting industrial carpentry, metalwork of various kinds, machine tools, agricultural machinery, silos, etc.

Industrial carpentry, steel products, agricultural machinery, silos, etc.

RECOMMENDED PRIMERS:

See in substrate preparation

See in substrate preparation

PREPARATION OF THE SUBSTRATE:

Iron surfaces: Remove any traces of rust, grease, calamine and humidity by means of thorough mechanical cleaning, followed by degreasing. Apply a coat of our SINTOFLEX - 494 or 490 series. After 6-12 hours apply fast drying enamel. Aluminum: Sanding followed by degreasing with organic solvents. Apply a coat of epoxy primer 193 or 190, or acrylic 793. Galvanized sheet: Sand lightly or scour, degrease with solvent, and then apply a coat of 193 epoxy primer, or 793 acrylic.

Iron surfaces: Remove any traces of rust, grease, calamine and humidity by means of thorough mechanical cleaning, followed by degreasing. Apply a coat of our SINTOFLEX - 494 or 490 series. After 6-12 hours apply fast drying enamel. Aluminum: Sanding followed by degreasing with organic solvents. Apply a coat of epoxy primer 193 or 190, or acrylic 793. Galvanized sheet: Sand lightly or scour, degrease with solvent, and then apply a coat of 193 epoxy primer, or 793 acrylic.

Iron surfaces: Remove any traces of rust, grease, calamine and humidity by means of thorough mechanical cleaning, followed by degreasing. Apply a coat of our SINTOFLEX - 494 or 490 series. After 6-12 hours apply fast drying enamel. Aluminum: Sanding followed by degreasing with organic solvents. Apply a coat of epoxy primer 193 or 190, or acrylic 793. Galvanized sheet: Sand lightly or scour, degrease with solvent, and then apply a coat of 193 epoxy primer, or 793 acrylic.

PREPARATION OF THE PRODUCT:

Comp. A: K.431 + Coloring Pastes 100 parts by weight Diluent (1): D.434 or D.525 15 – 20 parts by weight Mix until the color and consistency are uniform. Dilute to the desired viscosity. (1) For ambient temperatures ? of 25 °C, only synthetic thinner D.434 should be used.

Comp. A: K.431 + Coloring Pastes 100 parts by weight Diluent (1): D.434 or D.525 15 – 20 parts by weight Mix until the color and consistency are uniform. Dilute to the desired viscosity. (1) For ambient temperatures ? 25 °C, we recommend the use of synthetic thinner D.434 only

Comp. A: K.431 + Coloring Pastes 100 parts by weight Diluent (1): D.434 or D.525 15 – 20 parts by weight Mix until the color and consistency are uniform. Dilute to the desired viscosity. (1) For ambient temperatures ? 25 °C, we recommend the use of synthetic thinner D.434 only

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Single-component.

Fast-drying Synthetic Finishes 1K

Fast-drying Synthetic Finishes 1K

APPEARANCE OF THE FILM

Glossy

Glossy

Glossy

COLORS

By choice

By choice

By choice

DENSITY

1,25 Kg/l (± 0,05)

1,25 Kg/l (± 0,05)

1,25 Kg/l (± 0,05)

SUPPLY VISCOSITY

14” (± 3) DIN 8 at 25 °C

14” (± 3) DIN 8 at 25 °C SOLID % - VOLUME 50% (± 3%) SOLID % - WEIGHT 61% (± 3%)

14” (± 3) DIN 8 at 25 °C SOLID % - VOLUME 50% (± 3%) SOLID % - WEIGHT 61% (± 3%)

DRY RESIDUE

63% (± 3%)

DRYING AT 20 °C

Dry dust-free - Print-free: 4-5 hours. 20’ – 30’   - Touch-free 4 – 5 hours   - Forced Drying 30’ at 60 °C

Dry dust-free - Print-free: 4-5 hours. 20’ – 30’   - Touch-free 4 – 5 hours   - Forced Drying 30’ at 60 °C

CURING AT 20 °C

Dry dust-free - Print-free: 4-5 hours. 20’ – 30’   - Print-free 4 – 5 hours   - Forced Drying 30’ at 60 °C

RECOMMENDED COATS

1 (cross layer)

1 (cross layer)

A cross coat

RECOMMENDED-DFT

40 - 50 µm (2)

40 - 50 µm (2)

RECOMMENDED THICKNESS

40 - 50 µm (2)

THEORETICAL YIELD (3)

10,3 m2/lt or 7,9 m2/kg at 50 µm dry

10,3 m2/lt or 7,9 m2/kg at 50 µm dry

9,7 m2/lt or 7,7 m2/kg at 50 µm dry

RECOATING:

Wet-on-wet or max within 2 hours at 20 °C (2) Do not exceed the recommended thicknesses to avoid compromising the regular curing of the film. (3) In 75/25 ratio with P.900.

Wet-on-wet or max within 2 hours at 20 °C (2) Do not exceed the recommended thicknesses to avoid compromising the regular curing of the film. (3) In 75/25 ratio with P.900.

Wet-on-wet or max within 2 hours at 20 °C (2) Do not exceed the recommended thicknesses to avoid compromising the regular curing of the film. (3) In 75/25 ratio with P.900.

APPLICATION INSTRUCTIONS:

View pictograms Page 1.

View pictograms Page 1.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

Strictly follow the instructions on the labeling and in the safety data sheet.

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 09/24 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 09/24 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.