K.421 - SINTOLUX STANDARD L. - SMALTO R.E.

NATURE OF PRODUCT:

Fast-drying synthetic finish based on alkyds, characterized by good gloss. Very good resistance to weathering, oils, gasoline and fuels in general very well.

FIELD OF APPLICATION:

Fast-drying gloss finish for painting carpentry, metalwork of various kinds, machine tools, agricultural machinery in general and operating machines (tractors, agricultural wagons, cranes, bulldozers).

For painting all kinds of machinery intended for outdoor use such as general agricultural machinery and operating machines (tractors, farm wagons, cranes, bulldozers, machine tools, etc.).

RECOMMENDED PRIMERS:

See in substrate preparation

PREPARATION OF THE SUBSTRATE:

Iron surfaces: Remove any traces of rust, grease, calamine and humidity by means of thorough mechanical cleaning, followed by degreasing. Apply one coat of our Sintoflex 494 or 490 series primer. After 6- 12 hours apply Fast Drying Enamel. Aluminum: Sanding followed by degreasing with organic solvents. Apply one coat of Epoxy Primer 193 or 190, or Monoflex Primer 994 series. Galvanized sheet: Light sanding or buffing followed by degreasing with solvents. Apply one coat of Epoxy Primer Series 193 or 190, or Monoflex Primer Series 994.

Iron surfaces: Remove any traces of rust, grease, calamine and humidity by means of thorough mechanical cleaning, followed by degreasing. Apply one coat of our Sintoflex 494 or 490 series primer. After 6- 12 hours apply Fast Drying Enamel. Aluminum: Sanding followed by degreasing with organic solvents. Apply one coat of Epoxy Primer 193 or 190, or Monoflex Primer 994 series. Galvanized sheet: Light sanding or buffing followed by degreasing with solvents. Apply one coat of Epoxy Primer Series 193 or 190, or Monoflex Primer Series 994.

PREPARATION OF THE PRODUCT:

Comp. A: K.421 + Coloring Pastes 100 parts by weight Diluent (1): D.434 or D.525 15 - 20 parts by weight Mix until the color and consistency are uniform. Dilute to the desired viscosity. (1) For ambient temperatures ? of 25 °C, only synthetic thinner D.434 should be used. To improve overall strengths, hardness and speed of curing, it is possible to catalyze the glaze with our CZ.265 at 10% max. In this case, however, we recommend using only D.535 thinner or D.219.

Comp. A: K.421 + Coloring Pastes 100 parts by weight Diluent (1): D.434 or D.525 15 - 20 parts by weight Mix until the color and consistency are uniform. Dilute to the desired viscosity. (1) For ambient temperatures ? 25 °C, we recommend the use of synthetic thinner D.434 only To improve overall strengths, hardness and speed of curing, it is possible to catalyze the glaze with our CZ.265 at 10% max. In this case, however, we recommend using only D.535 thinner or D.219.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Single-component.

Fast-drying Synthetic Finishes 1K

APPEARANCE OF THE FILM

Glossy

APPEARANCE

Glossy

COLORS

By choice

By choice

DENSITY

0,983 Kg/l (± 0,05)

0,983 Kg/l (± 0,05)

SUPPLY VISCOSITY

16” Ford 8 at 25 °C

12” Ford 8 at 25 °C SOLID % - VOLUME 48 % (± 2%) SOLID % - WEIGHT 51% (± 2%)

SOLID CONTENT

52% (± 2%)

DRYING AT 20°C

Dry dust-free - Print-free: 4-5 hours. 20’ - 30’   - Touch-free 5 - 6 hours   - Forced Drying 30’ at 60 °C

DRYING

Dry dust-free - Print-free: 4-5 hours. 20’ - 30’   - Print-free 5 - 6 hours   - Forced Drying 30’ at 60 °C

RECOMMENDED LAYERS

1 (cross layer)

A cross coat

RECOMMENDED-DFT

40 - 50 µm (2)

RECOMMENDED THICKNESS

40 - 50 µm (2)

THEORETICAL YIELD (3)

9,9 m2/Lt or 9,1 m2/Kg at 50 µm dry

9,8 m2/Lt or 8,6 m2/Kg at 50 µm dry

RECOATING:

Wet-on- wet or max within 2/3 hours at 20 °C (2) Do not exceed the recommended thicknesses to avoid compromising the regular curing of the film. (3) In 75/25 ratio with P.900.

Wet-on- wet or max within 2/3 hours at 20 °C (2) Do not exceed the recommended thicknesses to avoid compromising the regular curing of the film. (3) In 75/25 ratio with P.900.

APPLICATION INSTRUCTIONS:

View pictograms Page 1.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 09/24 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 05/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.