They are used by mixing with the K. (Resins) converters of the Colortech tinting system to obtain finished enamels in the various mica/pearl colors. The P.8 series multipurpose pastes have a high concentration of pigment which allows obtaining enamels with great covering power. They can be used with all K series converters of the Industry list; however, to fully enhance the chromatic effect of the metallic pigment, it is recommended to use them mainly with specific resins for metallic or film-forming finishes such as the following binders: K.511 - K.531 - K.533 - K.374 - K.744 - K.772 - K.773 - K922 - K.944.
Preparation of gold-effect paints for furniture, lighting, giftware, handle industry, etc.
The P.8-series pastes are added to the K series resins pre-weighed according to the formulations of the chosen color and inserted in the Colortech. After adding the pastes to the converter, they must be dispersed immediately with a mechanical shaft stirrer (not gyroscope) if possible or, alternatively, limited to small quantities of finished product (1-2 liters) with strong manual stirring. NOTE: They can be used to create gloss metallic colors directly with 2k resins such as K.211 and K.711 in combination with additive Z.771. In the event of pastes difficult to stir, it is recommended not to leave them in the dispenser and/or with the dosing lid as the evaporation of even a small amount of solvent (since this is not hermetically sealed) would lead to a significant increase in viscosity such as to make the dosage of the paste itself difficult. Rev.: 09/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
P.810 paste should be mixed with the resins just before their use, as the metal in the paste alters when in contact with binders containing acid groups. Being a pigment of a metallic nature, the best aesthetic effect is only adequately enhanced by using converters for metallics, such as 2K K.773 and K.772, and 1K such as K.374 and nitro resins K.511, K.531, K.533 and K.922.
Mix the paste with the following resins in the ratios indicated 2K acrylics (K.773 - K.772) 80 P.810 20 1K resins (K.374 - K.531 - K.511 - K.533 - K.922) 85 P.810 15 Surface preparation and application methods according to the relevant data sheets of the chosen working resin. Due to the poor resistance of bronze pigments to most common resins, it is recommended that the product be used within 4 to 8 hours of its preparation. Always repaint with final clearcoat, preferably 2K acrylic type such as our clearcoat 701.00020 gloss or 704.00020 matte.
Store away from heat sources in suitable rooms and at temperatures between 0 °C and 35 °C. Close containers carefully after use. Always stir well before use. Rev.: 09/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB