Ultra high solid glossy acrylic enamels made of acrylic-polyester resins and isocyanic adduct to be mixed at the time of use.
Car bodywork (the ready-to-use product falls within the limits of Legislative Decree No. 161 of 2006) and industrial field; it can also be used when finishes with high aesthetic appearance or significant external resistance features are required.
Car bodywork (the ready-to-use product falls within the limits of Legislative Decree No. 161 of 2006) and industrial field; it can also be used when finishes with high aesthetic appearance or significant external resistance features are required.
Car bodywork (the ready-to-use product falls within the limits of Legislative Decree No. 161 of 2006) and industrial field; it can also be used when finishes with high aesthetic appearance or significant external resistance features are required.
The product requires the first application of a primer of epoxy 193 or acrylic 794 series.
The product requires the first application of a primer of epoxy 193 or acrylic 794 series.
The product requires the first application of a primer of epoxy 193 or acrylic 794 series.
Thoroughly mix component A until the color and consistency are uniform. Then mix with component B in the ratio indicated below. Comp. A: K.7H1 + Coloring pastes 100 parts by weight/volume Comp. B: CZ.711 (Standard) 50 parts by weight/volume Alternatively: CZ.720 (Fast) 50 parts by weight/volume CZ.700 (Slow) 50 parts by weight/volume After catalysis, the product is ready to use. If necessary, thin the perfectly stirred mixture with 5% of our acrylic thinner D.747 Fast, D.737 Standard or D.727 Slow. In order to obtain maximum resistance to light and bad weather, we recommend adding 2% of Z.288 Anti UV additive.
Thoroughly mix component A until the color and consistency are uniform. Then mix with component B in the ratio indicated below. Comp. A: K.7H1 + Coloring pastes 100 parts by weight/volume Comp. B: CZ.711 (Standard) 50 parts by weight/volume Alternatively: CZ.720 (Fast) 50 parts by weight/volume CZ.700 (Slow) 50 parts by weight/volume After catalysis, the product is ready to use. If necessary, thin the perfectly stirred mixture with 5% of our acrylic thinner D.747 Fast, D.737 Standard or D.727 Slow. In order to obtain maximum resistance to light and bad weather, we recommend adding 2% of Z.288 Anti UV additive.
Thoroughly mix component A until the color and consistency are uniform. Then mix with component B in the ratio indicated below. Comp. A: K.7H1 + Coloring tinters 100 parts by weight/volume Comp. B: CZ.711 (Standard) 50 parts by weight/volume Alternatively: CZ.720 (Fast) 50 parts by weight/volume CZ.700 (Slow) 50 parts by weight/volume After catalysis, the product is ready to use. If necessary, thin the perfectly stirred mixture with 5% of our acrylic thinner D.747 Fast, D.737 Standard or D.727 Slow. In order to obtain maximum resistance to light and bad weather, we recommend adding 2% of Z.288 Anti UV additive.
2K Acrylic UHS
2K Acrylic UHS
Two-component
Glossy
Glossy
Glossy
Miscellaneous (See ready-made dye pack)
Miscellaneous (See ready-made dye pack)
Miscellaneous (see ready-made dye pack)
1,015 Kg/l (± 0,05)
1,015 Kg/l (± 0,05)
1,015 Kg/l (± 0,05)
16" (± 3") DIN 8 at 20 °C SOLID % - VOLUME (A+B) 51% (± 2%) SOLID % - WEIGHT (A+B) 60% (± 3%) V.O.C. 2004/42/CE-IIB (d)(420)420
16" (± 3") DIN 8 at 20 °C SOLID % - VOLUME (A+B) 51% (± 2%) SOLID % - WEIGHT (A+B) 60% (± 3%) V.O.C. 2004/42/CE-IIB (d)(420)420
16" (± 3") DIN 8 at 20 °C
Dry dust-free - Print-free: 4-5 hours. 30’ – 40’ Touch-free 7h - 8h Drying 24 – 36 hours Forced Drying 60’ at 60 - 70 °C
Dry dust-free - Print-free: 4-5 hours. 30’ – 40’ Touch-free 7h - 8h Drying 24 – 36 hours Forced Drying 60’ at 60 - 70 °C
65% (± 3%) V.O.C. 2004/42/CE-IIB (d)(420)420
1 ( cross layer )
1 ( cross layer )
Dust-free - Print-free: 4-5 hours. 30’ - 40’ Touch-dry 7h - 8h Drying 24 - 36 hours at 20 °C Forced Drying 60’ at 60 - 70 °C
40 – 50 µm
40 – 50 µm
A crossed coat
10,6 m2/Lt or 9,7 m2/Kg at 50 µm dry
10,6 m2/Lt or 9,7 m2/Kg at 50 µm dry
40 - 50 µm
3 hours. The pot-life decreases at higher temperatures (1) In 70/30 ratio with P.900.
3 hours. The pot-life decreases at higher temperatures (1) In 70/30 ratio with P.900.
10 m2/Lt or 9,1 m2/Kg at 50 µm dry
View pictograms Page 1.
View pictograms Page 1.
3 hours. The pot-life decreases at higher temperatures (1) In 70/30 ratio with P.900.
After 12 hours minimum. When the film has completely hardened, the surface to be painted must be lightly sanded.
After 12 hours minimum. When the film has completely hardened, the surface to be painted must be lightly sanded.
After 12 hours minimum. When the film has completely hardened, the surface to be painted must be lightly sanded.
Strictly follow the instructions on the labeling and in the safety data sheet.
Strictly follow the instructions on the labeling and in the safety data sheet.
Strictly follow the instructions on the labeling and in the safety data sheet.
The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 09/24 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 09/24 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The storage room must be dry and with a temperature between +10°C and +35°C. Rev.: 08/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
P.010
NEUTRAL PASTE
P.100
BLACK DYES PASTE
P.106
DEEP BLACK PASTE
P.110
OXIDE YELLOW PASTE
P.115E
ECO LEMON YELLOW PASTE
P.116
COVERING ECO LEMON YELLOW PASTE
P.119E
ECO MEDIUM YELLOW PASTE
P.200E
ECO ORANGE PASTE
P.323
BRIGHT RED PASTE
P.325
DARK RED PASTE
P.330
OXIDE RED PASTE
P.354
SOLID RED PASTE
P.400
VIOLET PASTE
P.500
BLUE PASTE
P.600
GREEN PASTE
P.701
FINE ALUMINIUM PASTE
P.703
MAGNUM ALUMINIUM PASTE
P.900
WHITE PASTE
P.250
BRILLANT ORANGE ECO
P.562
LIGHT BLUE PASTE
TP.150
BLACK PASTE
TP.156
DEEP BLACK PASTE
P.TX050
FINE-GRAINED TEXTURE PASTE
P.TX70
MEDIUM-GRAINED TEXTURE PASTE
P.TX80
COARSE-GRAINED TEXTURE
P.TX90
EXTRA COARSE-GRAINED TEXTURE PASTE
P.F115
FLUORESCENT YELLOW PASTE
P.F200
FLUORESCENT ORANGE PASTE
P.F300
FLUORESCENT RED PASTE
P.F400
FLUORESCENT PINK PASTE
P.F500
FLUORESCENT BLUE PASTE
P.F600
FLUORESCENT GREEN PASTE
P.700
FINE-GRAINED ALUMINIUM PASTE
P.710
SHINY FINE-GRAINED ALUMINIUM PASTE
P.715
FINE MEDIUM-GRAINED ALUMINIUM PASTE
P.716
LIGHT COLOUR MEDIUM-GRAINED ALUMINIUM PASTE
P.720
SHINY MEDIUM-GRAINED ALUMINIUM PASTE
P.730
SHINY MAGNUM-GRAINED ALUMINIUM PASTE
P.733
COARSE-GRAINED ALUMINIUM PASTE
P.739
MAGNUM MEGA-GRAINED ALUMINIUM
P.740
LUMINOR ALUMINIUM PASTE
P.755
EXTRA-FINE ALUMINIUM PASTE
P.758
ULTRA-FINE ALUMINIUM PASTE
P.769
FINE-GRAINED ALUMINIUM PASTE
P.801
PEARLY MEDIUM PASTE
P.803
PEARLY MEDIUM WHITE EXTRA
P.805
PEARLY SHOT GOLD PASTE
P.811
PEARLY FINE PASTE
P.812
PEARLY MAGNUM PASTE
P.813
PEARLY WHITE REFLECTIVE
P.814
PEARLY MEGA MAGNUM PASTE
P.815
PEARLY SHOT RED
P.819
PEARLY SHOT LILAC
P.825
PEARLY SHOT BLUE
P.830
PEARLY GOLD PASTE
P.835
PEARLY SHOT GREEN PASTE
P.836
PEARLY GOLD OLYMPIC PASTE
P.840
PEARLY SHOT VIOLET
P.850
PEARLY BRONZE PASTE
P.851
PEARLY BRIGHT RED
P.852
PEARLY COPPER RED
P.853
PEARLY MAGNUM RED
P.854
PEARLY RED PASTE
P.866
DARK COPPER PASTE
K.232
POLIURETANICO IN.LE SEMILUCIDO
TP.016
CLEAR OXIDE YELLOW PASTE
TP.037
CLEAR OXIDE RED PASTE
TP.065
CLEAR OXIDE RED PASTE
TP.066
CLEAR OXIDE YELLOW PASTE
TP.110
OXIDE YELLOW (EX TP.111)
TP.115
LEMON YELLOW (EX TP.102)
TP.116
COVERING LEMON YELLOW (EX TP.122)
TP.119
MEDIUM YELLOW (EX TP.114)
TP.200
ORANGE (EX TP.220)
TP.323
BRIGHT RED (EX TP.370)
TP.325
DARK RED (EX TP.321)
TP.330
OXIDE RED (EX TP.300)
TP.354
SOLIDE RED (EX TP.329)
TP.400
VIOLET (EX TP.440)
TP.500
BLUE (EX TP.510)
TP.600
GREEN (EX TP.607)
TP.900
WHITE (EX 40610)
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB