Especially suitable for BC 1K and 2K such as K.374 and K.773 in combination with aluminum or mica pigments. Used to achieve special shades and iridescence (yellow-blue flip-flop effect) typical of automotive and cycle/motorcycle finishes.
Dilution resin for P-series concentrated pastes. Used to facilitate and optimize the dosing of small amounts of concentrated pastes. Especially suitable for organic and inorganic solid pigment pastes.
Prepare the enamel in the required resin and color following the Colortech formulation. Mix thoroughly by hand for quantities less than or equal to 1 Lt with stirrer for larger volumes. Usage ratio: Converters 1K (374 - 922 - K.EFT) MAX up to 3% Converters 2K (374 - 773) MAX up to 5% NOTE: Not suitable for pastel colors. P.995 paste has no covering power.
Select the required formulation from Colortech, choose the converter and set the desired quantity. In the case of preparing small amounts of enamel, very small weighings may be required that are very difficult to dose. In these situations, it is more convenient to mix the paste to be weighed at a ratio of 10 to 90 with P.000 paste elongation resin and weigh 10 times the amount required in the formulation. In case of using prediluted pastes, recalculation of the dosage is done automatically by the system by clicking on the "green 10% box" in the formulation screen. Prediluted paste preparation: P-series coloring paste 10 parts P.000 90 parts Mix thoroughly by hand or with stirrer. NOTE: Not recommended for fluorescent, aluminum, pearl, textured and matte pastes. Store in suitable rooms and away from heat sources, at temperatures between 0 °C and 35 °C. Close containers thoroughly immediately after use. Always stir well before use. Rev.: 09/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
Store away from heat sources in suitable rooms and at temperatures between 0 and 35 °C. Close containers carefully immediately after use. Always stir thoroughly before use. Rev.: 09/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
Administrative headquarters and Eyewear
Cosmetic Packaging Division
Via dell'industria, 21
20882 Bellusco (MB) - Italy
+ 39 039 684 08 50 / 53
Industry / Car Refinish Division
Via 1° maggio, 22 - Località Cagnano
36026 Pojana Maggiore (VI) - Italy
+ 39 044 476 44 15
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB
