K.411 - SINTOCAR EXTRA LUCIDO - SMALTO R.E.

NATURE OF PRODUCT:

Fast-drying synthetic finish based on alkyds, characterized by good gloss. Very good resistance to weathering, oils, gasoline and fuels in general.

FIELD OF APPLICATION:

Industrial bodywork, agricultural machinery, carpentry, various types of metalwork.

Industrial bodywork, agricultural machinery, carpentry, etc.

PREPARATION OF THE SUBSTRATE:

Iron surfaces: Remove any traces of rust, grease, calamine and humidity by means of thorough mechanical cleaning, followed by degreasing. Apply one coat of our Sintoflex 494 or 490 series primer. After 6- 12 hours apply Fast Drying Enamel. Aluminum: Sanding followed by degreasing with organic solvents. Apply one coat of Epoxy Primer 193 or 190, or Monoflex Primer 994 series. Galvanized sheet: Light sanding or buffing followed by degreasing with solvents. Apply one coat of Epoxy Primer Series 193 or 190, or Monoflex Primer Series 994.

Iron surfaces: Remove any traces of rust, grease, calamine and humidity by means of thorough mechanical cleaning, followed by degreasing. Apply one coat of our Sintoflex 494 or 490 series primer. After 6- 12 hours apply Fast Drying Enamel. Aluminum: Sanding followed by degreasing with organic solvents. Apply one coat of Epoxy Primer 193 or 190, or Monoflex Primer 994 series. Galvanized sheet: Light sanding or buffing followed by degreasing with solvents. Apply one coat of Epoxy Primer Series 193 or 190, or Monoflex Primer Series 994.

PREPARATION OF THE PRODUCT:

Comp. A: K.411 + Coloring Pastes 100 parts by weight Diluent (1): D.434 or D.525 15 - 20 parts by weight Mix until the color and consistency are uniform. Dilute to the desired viscosity. (1) For ambient temperatures ? 25 °C, we recommend the use of synthetic thinner D.434 only To improve overall strengths, hardness and speed of curing, it is possible to catalyze the enamel with our CZ.265 at 10% max. In this case, however, we recommend using only D.535 thinner or D.219.

Comp. A: K.411 + Coloring Pastes 100 parts by weight Diluent (1): D.434 or D.525 15 - 20 parts by weight Mix until the color and consistency are uniform. Dilute to the desired viscosity. (1) For ambient temperatures ? of 25 °C, only synthetic thinner D.434 should be used. To improve overall strengths, hardness and speed of curing, it is possible to catalyze the enamel with our CZ.265 at 10% max. In this case, however, we recommend using only D.535 thinner or D.219.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Fast-drying Synthetic Finishes 1K

Single-component.

APPEARANCE

Glossy

APPEARANCE OF THE FILM

Glossy

COLORS

By choice

By choice

DENSITY

0,94 Kg/l (± 0,05)

0,99 Kg/l (± 0,05)

SUPPLY VISCOSITY

16” (± 2) DIN 8 at 25 °C SOLID % - VOLUME 49% (± 2%) SOLID % - WEIGHT 51% (± 2%)

110” (± 3) DIN 8 at 25 °C

DRYING AT 20 °C

Dry dust-free - Print-free: 4-5 hours. 20’ - 30’   - Touch-free 4 - 5 hours   - Forced Drying 30’ at 60 °C

SOLID CONTENT

51% (± 2%)

RECOMMENDED LAYERS

1 (cross layer)

DRYING AT 20 °C

Dry dust-free - Print-free: 4-5 hours. 20’ - 30’   - Print-free 4 - 5 hours   - Forced Drying 30’ at 60 °C

RECOMMENDED-DFT

40 - 50 µm (2)

RECOMMENDED LAYERS

A cross coat

THEORETICAL YIELD (3)

10,2 m2/Lt or 9,5 m2/Kg at 50 µm dry

RECOMMENDED THICKNESS

40 - 50 µm (2)

RECOATING:

Wet-on-wet or max within 2/3 hours at 20 °C (2) Do not exceed the recommended thicknesses to avoid compromising the regular curing of the film. (3) In 75/25 ratio with P.900.

THEORETICAL YIELD (3)

9,6 m2/Lt or 8,5 m2/Kg at 50 µm dry

APPLICATION INSTRUCTIONS:

View pictograms Page 1.

RECOATING:

Wet-on-wet or max within 2/3 hours at 20 °C (2) Do not exceed the recommended thicknesses to avoid compromising the regular curing of the film. (3) In 75/25 ratio with P.900.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 09/24 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The storage room must be dry and with a temperature between +10 °C and +35 °C. Rev.: 05/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.