K.374 - RESINA PER BASI OPACHE

FIELD OF APPLICATION:

Double-layer cycles for the preparation of metallic and/or pearly Base-Coat to be used for painting industrial products in general, commercial vehicles and public service vehicles.

Double-layer cycles for the preparation of metallic and/or pearly Base-Coat to be used for painting industrial products in general, commercial vehicles and public service vehicles.

RECOMMENDED PRIMERS:

See in substrate preparation

PREPARATION OF THE SUBSTRATE:

Matte base coat 374, can be applied after appropriate preparation (see relevant sheets) and subsequent degreasing to: · Epoxy primers, such as our 193.R7042; · 2K acrylic primers, such as our 794.70055/794.70065/794.91100 or 793.70701.

Matte base coat 374, can be applied after appropriate preparation (see relevant TDS) and subsequent degreasing to: · Epoxy primers, such as our 193.R7042; · 2K acrylic primers, such as our 794.70055/794.70065/794.91100 or 793.70701.

PREPARATION OF THE PRODUCT:

Mix until the color and consistency are uniform. Comp. A: K.374 + Coloring Pastes 100 Parts by weight Diluent: D.721 or D.737 70 – 90 Parts by weight NOTE: Possibility of 10% catalysis with CZ.711 by weight on Base-Coat to improve cohesion between layers.

Mix until the color and consistency are uniform. Comp. A: K.374 + Coloring Pastes 100 Parts by weight Diluent: D.721 or D.737 70 – 90 Parts by weight NOTE: Possibility of 10% catalysis with CZ.711 by weight on Base-Coat to improve cohesion between layers.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Single-component.

Base Coat

APPEARANCE OF THE FILM

Semigloss

APPEARANCE

Semigloss

COLORS

On request

On request

DENSITY

0,94 Kg/L (± 0,05)

SOLID CONTENT

21% (± 2)

DENSITY

0,94 Kg/L (± 0,05) SOLID % - VOLUME 17% (± 2) SOLID % - WEIGHT 21% (± 2)

DRYING

Dry dust-free - Print-free: 4-5 hours. 10’ - 15’ at 20 °C   Drying at 20 °C 20’ – 25’

DRYING AT 20°C

Dry dust-free - Print-free: 4-5 hours. 10’ - 15’   Drying at 20 °C 20’ – 25’

RECOMMENDED LAYERS

Two coats (20-25 µm)

Two coats

RECOATING:

Minimum 20’ at 20 °C; Maximum 30’ at 20 °C

RECOMMENDED – DFT

20 - 25 µm

RECOATING:

Minimum 20’ at 20 °C; Maximum 30’ at 20 °C

OVERPAINTABLE

Clearcoat 701.HS010 - 701.HS060 – 701.HS100 – 701.00015 N.B. Before applying the clear coat, wait 20 - 25 minutes at room temperature (20 °C) or 5 - 10 minutes at 40 - 50 °C. NOTES: Do not exceed the total recommended film thickness! The use of tinted primer is recommended for some particular tints, although most formulas have high opacity and excellent coverage. K.374 is specifically for the formulation of metallic Base-Coats, however, with special precautions, it can also be used to make pastel colors in shades of yellow-red-orange. In this case, it is important to strictly follow a particular operating procedure, namely: weigh the P pastes and mix them with stirrer; only after thoroughly dispersing the pastes add K.374, and then mix it again with stirrer.

Clearcoat 701.HS010 - 701.HS060 – 701.HS100 – 701.00015 N.B. Before applying the clear coat, wait 20 - 25 minutes at room temperature (20 °C) or 5 - 10 minutes at 40 - 50 °C.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

APPLICATION INSTRUCTIONS:

View pictograms Page 1. NOTES: Do not exceed the total recommended film thickness! The use of tinted primer is recommended for some particular tints, although most formulas have high opacity and excellent coverage. K.374 is specifically for the formulation of metallic Base-Coats, however, with special precautions, it can also be used to make pastel colors in shades of yellow-red-orange. In this case, it is important to strictly follow a particular operating procedure, namely: weigh the P pastes and mix them with stirrer; only after thoroughly dispersing the pastes add K.374, and then mix it again with stirrer.

STORAGE STABILITY:

In unopened and sealed packages, kept at a temperature of +5 to +30 °C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE STABILITY:

In unopened and sealed packages, kept at a temperature of +5 to +30 °C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.