Product for general use, metalworking, metal furniture, interior furnishings, objects and products for indoor use.
Ferrous surfaces: SA2 sandblasting or thorough mechanical cleaning followed by washing with solvent. If the substrate is cleaned with aqueous-based detergent solutions, it is recommended to rinse to avoid that any traces of surfactants affect the adhesion as well as the protective and anti-corrosive properties of the dried film. Apply a coat of two-component epoxy primer of the 193W series or one-component primer of the 494W series. Plastic materials: (ABS rigid PS PVC) remove any contaminating substance from the surface as a release agent or various pollutants by means of suitable washing processes. Apply one or two coats of the 394W10190 primer.
Mix thoroughly until uniform colour and consistency. Dilute, depending on the system and application conditions, from 5% to 20% by weight with demineralised water up to the desired viscosity. Applicable with conventional airbrush, mixed air low-pressure and airless high-pressure systems.
One-component
MATT 5±1 gloss at 60°
White
1,28 kg/l (± 0,05)
Thixotropic
Dust free 10 - 15 at 25°C Touch dry 1 - 2 hours at 25°C Total hardening after about 8 - 12 hours at 25°C Forced drying 30’ - 40’ at 60°C - 70°C
Two coats
40 - 60 MICRON
5 - 6 m2/kg
Read and carefully follow the instructions on the label and in the safety data sheet.
The storage room must be dry, protected from sunlight and with a temperature between +5°C and +30°C. Rev.: 09/22 Data and information contained in this technical data sheet are the result of our experience and accurate laboratory tests. However, since the painting process is a set of operations that are beyond our control, they therefore in no way constitute any form of guarantee on the final performance of the cycle itself.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
Administrative headquarters and Eyewear
Cosmetic Packaging Division
Via dell'industria, 21
20882 Bellusco (MB) - Italy
+ 39 039 684 08 50 / 53
Industry / Car Refinish Division
Via 1° maggio, 22 - Località Cagnano
36026 Pojana Maggiore (VI) - Italy
+ 39 044 476 44 15
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB
