The 5:1 acrylic two-component primer 794.90930 is a high-fill insulating primer characterized by ease and versatility of use. Distinguished by excellent spreading and casting resistance, fast curing and easy sanding. Absence of sagging and/or marks; can be used for both touch-ups and total renovations. Applicable to properly prepared polyester putties, fiberglass, old two-component paints (still adhering and intact).
Can be used as an insulating, filling and highly filling primer depending on the requirements and application scheme used. There are three different types of hardeners to complete the product: Standard, Slow and Fast to be used depending on the working temperature and/or size of the workpiece to be painted.
Thoroughly mix component A until the color and consistency are uniform. Then mix with component B in the ratio shown below: Component Blend by volume Blend by weight Primer 794.90930 5 100 Hardener CZ.711 (*) Standard 1 13 Diluent D.737 (*) Standard 1-1,3 15-20 (*) Hardener and thinner should be chosen according to environmental conditions and the size of the piece. Dilute the perfectly blended mixture with 15-20% of our polyacrylic thinners until obtaining the best viscosity for the desired effect. Room temperature +15 °C to +25 °C Most applications are made under such conditions. Use Standard hardener and thinner; Room temperature +5 °C to +15 °C In this case and particularly for small parts or touch-ups use CZ.720 rapid hardener and Standard thinner; Room temperature +25 °C to +35 °C Prevent the product from drying too quickly by originating bad distension and too many spray fumes. Slow down the drying time of the film by using slow thinner D.727. If the size of the part is particularly large (e.g., complete painting of a vehicle) also use the slow hardener CZ.700. We do not recommend using the product as highly filler in this case. Application diagrams (Referred to temperature conditions of 20 °C) Application data Insulator Filler Highly filler Dilution (by weight) 15-20 13-15 13 Gravity Feed nozzle 1.4-1,8 1.4-1.8 1.8 Number of coats 2-3 2-3 3-4 Interval between coats 8-10 minutes 8-10 minutes 10 minutes Recommended thickness 100-125 µm 125-150 µm 150-200 µm Pot-life 50 minutes 50 minutes 45 minutes Curing at A.T. 5 hours 5-6 hours 6-8 hours Curing in furnace 45 minutes at 60 °C 50 minutes at 60 °C Not recommended IR medium wave curing 10 minutes 10 minutes Not recommended
Two-component;
Matte.
White
1,65 Kg/l (± 0,05)
Thixotropic Product
78% (± 2%) V.O.C. 2004/42/CE-IIB (c)(540)540
Dry dust-free - Print-free: 4-5 hours. 10’ at 20 °C - 25 °C Forced Drying 30’ - 40’ at 60 °C - 70 °C (sandable)
Two coats
100 - 125 µm
60’. The pot-life decreases at higher temperatures
Strictly follow the instructions on the labeling and in the safety data sheet.
In unopened and sealed packages, kept at a temperature of +5 to +30 °C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
7H1.F0210
ELITE UHS
7H1.F0249
ELITE UHS
7H1.F0601
ELITE UHS
7H1.F268/A
ELITE UHS
7H1.F296/A
ELITE UHS
7H1.IC194
ELITE UHS
7H1.R369
ELITE UHS RENAULT 369 BLANC GLACIER
374.00199
BC TOYOTA 199 - SILVER
374.040
BC TOYOTA 040 - SUPER WHITE
374.1E0
BC TOYOTA 1E0 - DARK GREY MICA
374.2431
BC FORD 6.1/2431 - MONDUST SILVER
374.2851
BC FORD 2851 - BLACK PANTHER
374.BMW354
BC BMW 354 - MET. TITANSILBER
374.D69
BC RENAULT D69 - GRIS PLATINE
374.DB744
BC DB.744 - BRILLANT SILVER
374.DB761
BC DB.761 - MET. POLARISSILBER
374.EZR
BC CITROEN EZR - GRIS ALLUM.
374.F0249
BC FIAT 249/96 - WHITE
374.F0348
BC FIAT 348 - MET. SILVER GREY
374.F0589A
BC FIAT 589/A - DEEP SILVER GREY
374.F0595A
BC FIAT 595/A - FLAWLESS GREY
374.F0601
BC FIAT 601 - BLACK
374.F0602A
BC FIAT 602/A - ALUMINIUM
374.F0612A
BC FIAT 612/A - ELISA GREY
374.F0632
BC FIAT 632 - MET. BLACK
374.F0647F
BC FIAT - FINE-GRAINED STEEL GREY
374.F0647G
BC FIAT - COARSE-GRAINED STEEL GREY
374.F0695
BC FIAT 695 GREY MET
374.F0891B
BC FIAT 891/B - MET. PROVOCATIVE BLACK
374.F268/A
BC FIAT 268/A - SUPER WHITE
374.F296/A
BC FIAT 296 - WHITE
374.F565/A
BC FIAT 565/A - MET. ALLEGRO GREY
374.F599/A
BC FIAT 599/A - MET. MAGNETIC BLUE
374.F876/B
BC FIAT 876/B - MET. CARBON BLACK
374.GM157
BC OPEL - STARSILBER LII MET. GREY
374.LC9Z
BC VOLKSWAGEN LC9Z - PEARL BLACK
374.LY7W
BC VOLKSWAGEN - MET. LICHTSILBER
374.LY9C
BC VOLKSWAGEN LY9C - IBISWEISS
374.R369
BC RENAULT 369 - BLANC GLACIER
374.R676
BC RENAULT 676 - NOIR NACRE
374.VWA7W
BC VOLKSWAGEN A7W - REFLEXSILBER
D.040
Blending Thinner
D.721
Thinner for base coat
D.727
SLOW
D.737
STANDARD
D.747
FAST
CZ.105
EPODUR STANDARD
CZ.700
ACRYDUR HS
CZ.711
ACRYDUR HS
CZ.720
ACRYDUR HS
CZ.750
ACRYDUS UHS
CZ.760
ACRYDUR UHS
CZ.761
ACRYDUR
CZ.770
ACRYDUR UHS
CZ.771
ACRYDUR
CZ.781
ACRYDUR
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB