Applied to fill or level imperfections on substrates of various kinds, before applying preparatory primers for the top coat. Except for copper and special stainless steels, it can be used on any type of metal substrate, including galvanized (electroplated/galvanized) sheet aluminum, and brass. Application is possible on rust-proofing primers, insulating primers and fillers except for acid-hardening wash-primer and single-component synthetic resin-based primers or anchors. In case of application on old paints, make sure that they are completely dried and that they are not of thermosetting or elastic acrylic nature.
Great adhesion to even heavily nicked or rust corroded metal parts. STK.VTR is ideal for plastering on large vertical surfaces due to its high thixotropy. Compatible with water-based painting systems.
Roughen the part to be treated with P 100 grit dry abrasive paper, then remove all traces of grease, oils, silicones, fingerprints, abrasive glues, release agents (on UP-GF) and dust, by means of anti-silicone washing thinner. When applying to old paints, roughen with P 320 grit dry sandpaper. Apply by trowel, even in successive coats spaced several minutes apart, spreading over the area to be repaired.
Two-component
Light green
1,600 Kg/l (± 0,050 Kg/l)
83.0% (± 2%)
Dust-free: 7’ Ready for sanding: 30’
Ready for sanding: 7’
6’ at 23 °C
7,0 m2/l 100 µm thickness
Strictly follow the instructions on the labeling and in the safety data sheet.
In unopened and sealed packages, kept at a temperature of +5 to +30 °C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.
The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.
7H1.F0210
ELITE UHS
7H1.F0249
ELITE UHS
7H1.F0601
ELITE UHS
7H1.F268/A
ELITE UHS
7H1.F296/A
ELITE UHS
7H1.IC194
ELITE UHS
7H1.R369
ELITE UHS RENAULT 369 BLANC GLACIER
374.00199
BC TOYOTA 199 - SILVER
374.040
BC TOYOTA 040 - SUPER WHITE
374.1E0
BC TOYOTA 1E0 - DARK GREY MICA
374.2431
BC FORD 6.1/2431 - MONDUST SILVER
374.2851
BC FORD 2851 - BLACK PANTHER
374.BMW354
BC BMW 354 - MET. TITANSILBER
374.D69
BC RENAULT D69 - GRIS PLATINE
374.DB744
BC DB.744 - BRILLANT SILVER
374.DB761
BC DB.761 - MET. POLARISSILBER
374.EZR
BC CITROEN EZR - GRIS ALLUM.
374.F0249
BC FIAT 249/96 - WHITE
374.F0348
BC FIAT 348 - MET. SILVER GREY
374.F0589A
BC FIAT 589/A - DEEP SILVER GREY
374.F0595A
BC FIAT 595/A - FLAWLESS GREY
374.F0601
BC FIAT 601 - BLACK
374.F0602A
BC FIAT 602/A - ALUMINIUM
374.F0612A
BC FIAT 612/A - ELISA GREY
374.F0632
BC FIAT 632 - MET. BLACK
374.F0647F
BC FIAT - FINE-GRAINED STEEL GREY
374.F0647G
BC FIAT - COARSE-GRAINED STEEL GREY
374.F0695
BC FIAT 695 GREY MET
374.F0891B
BC FIAT 891/B - MET. PROVOCATIVE BLACK
374.F268/A
BC FIAT 268/A - SUPER WHITE
374.F296/A
BC FIAT 296 - WHITE
374.F565/A
BC FIAT 565/A - MET. ALLEGRO GREY
374.F599/A
BC FIAT 599/A - MET. MAGNETIC BLUE
374.F876/B
BC FIAT 876/B - MET. CARBON BLACK
374.GM157
BC OPEL - STARSILBER LII MET. GREY
374.LC9Z
BC VOLKSWAGEN LC9Z - PEARL BLACK
374.LY7W
BC VOLKSWAGEN - MET. LICHTSILBER
374.LY9C
BC VOLKSWAGEN LY9C - IBISWEISS
374.R369
BC RENAULT 369 - BLANC GLACIER
374.R676
BC RENAULT 676 - NOIR NACRE
374.VWA7W
BC VOLKSWAGEN A7W - REFLEXSILBER
D.040
Blending Thinner
D.721
Thinner for base coat
D.727
SLOW
D.737
STANDARD
D.747
FAST
CZ.105
EPODUR STANDARD
CZ.700
ACRYDUR HS
CZ.711
ACRYDUR HS
CZ.720
ACRYDUR HS
CZ.750
ACRYDUS UHS
CZ.760
ACRYDUR UHS
CZ.761
ACRYDUR
CZ.770
ACRYDUR UHS
CZ.771
ACRYDUR
CZ.781
ACRYDUR
VERNICI CALDART SRL © 2022 | P.IVA IT00759630965 | Privacy Policy | Cookies Policy | Ethical Code | Whistleblowing | Financing | SOFTWEB