EFT.451 - EFFETTO ORO ANTICO 2K

PRODUCT DESCRIPTION:

Two-component paint made of dispersion of metallic aluminum in solvent and special resins. The innovative formulation of the EFT series finishes makes it possible to obtain coatings with final mechanical and chemical characteristics that do not require repainting with protective clear coats. Good surface hardness.

END USES:

Objects, cosmetics, furnishings, appliances, handicrafts and products in general designed for indoor use.

SUBSTRATE PRE-TREATMENT:

The pre-treatment of the substrate depends on the type of filler used. The product can be applied directly on some plastic materials such as, for example, ABS or ABS + PC. For metal substrates, the application of a suitable primer is recommended, preferably gloss black (to improve the metallic effect).

PRODUCT PRE-TREATMENT:

The paint should always be shaken before use. Comp. A : EFT. 100 parts by weight Comp. B : CZ.678 on plastic 5 parts by weight Or : CZ.711 on metal (1) 5 parts by weight (1) In the case of application on metal (such as for example polished and/or brushed aluminum or polished steel), it is necessary to add 3% by weight of Z.287. Repainting with a 2K final protective product is recommended. For detailed information regarding the direct application of EFT on metal, it is advisable to contact our Caldart Research & Development laboratory. After catalysis, the product is ready for use. To improve surface hardness and scratch resistance, we recommend adding 1 - 2% of Z.070.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Two-component

FILM ASPECT

Satin

COLOURS

Various

DENSITY

0,90 Kg/l (± 0,02)

DELIVERY VISCOSITY

11” (± 2) ASTM 4 at 20 °C

SOLID CONTENT

5% (± 1)

CURING TIME AT 20°C.

Dust free 3’ - 5’ at A.T. Touch dry 10’ at A.T. Hardening 40’ at 50°C - 60°C

THEORETICAL YIELD

2,5 - 2,8 m2/Lt with two layers

RECOATABILITY

Wet on wet consigliata spece se Dopo indurimento la riverniciabilir

RECOMMENDED LAYERS

2-3 layers

POT-LIFE : 2 hours at 20°C

RECOATABILITY:

In case you want to increase the abrasion resistance or more generally the chemical-physical resistance of the film, it is possible to cover it with 2K acrylic paints like our glossy 701.00020 or 701.00015 or the matt 704.00020.

SAFETY STANDARDS:

Read and carefully follow the instructions on the label and in the safety data sheet.

STORAGE CONDITIONS:

In unopened and sealed packages, kept at a temperature between +5°C +30°C. Rev.: 03/22 Data and information contained in this technical data sheet are the result of our experience and accurate laboratory tests. However, since the painting process is a set of operations that are beyond our control, they therefore in no way constitute any form of guarantee on the final performances of the cycle itself.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.