EFT.990 - EFFETTO CROMO 1K PRONTO ALL''USO

PREPARATION OF THE SUBSTRATE:

Preparation of the substrate depends on the type of material to be painted. The surface must be previously painted with a glossy-looking and perfectly leveled enamel or primer + enamel. Particularly suitable for metal substrates are the enamels obtained from K.111 and P.EP or P series pastes. Possible to use 701.00020 as undercoat preparation. For ABS or ABS-PC substrates, use 701.00015 colored with TP pastes.

PREPARATION OF THE PRODUCT:

Paint should always be stirred before use. Comp. A : EFT.990 100 parts by weight Comp. B (optional) : CZ.678 2 parts by weight It can be used as 1K only on undercoat from K.111 (P.EP). EFT.990 always needs to be repainted with final protective clear coat.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

1K with a possibility of 2K

APPEARANCE OF THE FILM

Satin

COLORS

Silver-plated

SPECIFIC WEIGHT

0,90 Kg/l (± 0,02)

SUPPLY VISCOSITY

11” (± 2) ASTM 4 at 20 °C

DRY RESIDUE

5% (± 1)

DRYING AT 20 °C.

Dry dust-free - Print-free: 4-5 hours. 3’-5’ at A.T Print-free - Print-free: 4-5 hours. 10’ at A.T Curing - Print-free: 4-5 hours. 30’ at 60 °C

THEORETICAL YIELD

1 - 2 m2/Lt two coats

RECOATING:

Wet-on-wet recommended especially if After curing the repainting

RECOMMENDED LAYERS

2 - 3 coats

POT LIFE : 2 hours at 20 °C

APPLICATION DIAGRAM:

PREPARATION OF THE SUBSTRATE

EFT.990

FINAL PROTECTIVE CLEARCOAT

METAL

PLASTIC (ABS ABS-PC)

1K K.111 / P.EP106 Ratio 80-20 35% CZ.105 Dil. 50% D.150 1 hour a.t. + 1 hour at 60 °C or 24 hours A.T. 701.00015 90/10 TP.150 45% CZ.280 24 hours a.t. Ready-to-use 2 coats 1 hour at a.t. or 30’ at 60 °C 701.00020 33% CZ.265 Dil. 80% D.737 two coats 10/15 min apart. Final baking 1 hour at 60 °C 2K K.111 / P.106 Ratio 70-30 33% CZ.105 Dil. 50% D.150 1 hour a.t. + 1 hour at 60 °C or 24 hour a.t. EFT.990 Cat. 2% with CZ.678 2 coats 1 hour at a.t. or 30’ at 60 °C 701.00020 33% CZ.265 Dil. 80% D.737 two coats 10/15 min apart. Final baking 1 hour at 60 °C 701.00020 33% CZ.265 Dil. 30% D.737 1 hour at 60 °C

RECOATING:

Recoatable after 1 hour at A.T., or after 30 minutes at 60 °C with 701.00020.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

In unopened and sealed packages, kept at temperatures between +5 °C to +30 °C. Rev.: 10/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.