application datasheet

application datasheet

Download sheet in pdf

PWTX70 - PASTA TEXTURE GRANA MEDIA WB

View Product Shelf Life

FIELD OF APPLICATION:

Used to achieve special uniform texture-effect finishes. The use of these pastes, improves surface hardness, abrasion resistance and gives the coating the ability to cover any minor imperfections in the substrate. The choice of paste (fine, medium, coarse, extra coarse), depends on the final look you want to achieve.

PREPARATION OF THE SUBSTRATE:

Refer to the data sheet of the enamel used.

PREPARATION OF THE PRODUCT:

They can be used on all our dye system converters except furnace-drying systems with temperatures above 140 °C. Add the paste to the converter and mix thoroughly, ideally with stirrer. Min. Max Enamels 1K 8% 10% Enamels 2K 12% 15% If used on 2K glazes, catalyze only the glaze portion (thus excluding the added paste) in the prescribed proportions.

APPLICATION:

Use appropriate nozzles, depending on the average particle size of the chosen paste: PWTX50 20 µm PWTX70 35 µm PWTX80 50 µm PWTX90 90 µm The final texture-effect, may be more or less highlighted depending on the application conditions (e.g., the more you blur, the more you highlight the texture effect).

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet. NOTE: The addition of PWTX paste lowers the viscosity of the converter.

STORAGE CONDITIONS:

Store in unopened and sealed packages kept at a temperature of +5 to +30 °C. Rev.: 12/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.

Other products in TINTOMETRO E PRODOTTI ALL’ACQUA

 > WATER-BASED TINTERS

KW731

WATER-BASED DTM GLOSS ACRYLIC

PW010

NETRUAL WB PASTE

PW050

MATTING AGENT WB PASTE

PW100

BLACK WB PASTE

PW110

OXIDE YELLOW WB PASTE

PW115

LEMON YELLOW WB PASTE

PW119

MEDIUM YELLOW WB PASTE

PW166

DEEP BLACK WB

PW200

ORANGE WB PASTE

PW303

BRIGHT RED WB PASTE

PW305

DARK RED WB PASTE

PW330

OXIDE RED WB PASTE

PW400

VIOLET WB PASTE

PW500

BLUE WB PASTE

PW600

GREEN WB PASTE

PW701

FINE ALUMINIUM WB PASTE

PW703

PASTA ALLUMINIO MAGNUM WB

PW900

WHITE WB PASTE

 > WATER-BASED TEXTURE TINTERS

PWTX50

FINE-GRAINED TEXTURE WB PASTE

PWTX80

COARSE-GRAINED TEXTURE WB PASTE

PWTX90

EXTRA COARSE-GRAINED TEXTURE WB PASTE

 > WATER-BASED PEARLY TINTERS

PW801

PEARLY MEDIUM WB PASTE

PW805

PEARLY SHOT GOLD WB PASTE

PW825

PEARLY SHOT BLUE WB PASTE

PW836

PEARLY GOLD OLYMPIC WB PASTE

 > WATER-BASED BINDERS

KW111

EPOLAK GLOSS WATER-BASED

Leghe Metallo Vetro

KW112

EPOLAK SEMI-GLOSS WATER BASED

Leghe Metallo Vetro

KW162

EPOLAK EMBOSSED SEMI-GLOSS WATER-BASED

Leghe Metallo Vetro

KW193

EPOFLEX WATER-BASED

Leghe Metallo Plastica Vetro

KW374

WATER-BASED BASE COAT BINDER

Plastica

KW431

ONE COAT 1K WATER BASED

Leghe Metallo Vetro

KW494

SINTOFLEX WATER-BASED

Metallo

KW631

WATER-BASED GLOSS BRUSH ENAMEL

Leghe Metallo Vetro

KW634

WATER-BASED MATT BRUSH ENAMEL

Leghe Metallo Vetro

KW644

MICALUX BRUSH WATER-BASED

Leghe Metallo Vetro

KW711

Water-based Extra Gloss Acrylic

KW721

WATER-BASED GLOSS ACRYLIC

Leghe Metallo Plastica Vetro

KW723

WATER-BASED SEMI-GLOSS ACRYLIC

Leghe Metallo Plastica Vetro

KW734

WATER-BASED DTM MATT ACRYLIC

 > WATER-BASED FLUORESCENT TINTERS

PWF115

FLUORESCENT YELLOW PASTE WB

PWF300

FLUORESCENT RED PASTE WB

PWF400

FLUORESCENT PINK PASTE WB

PWF600

FLUORESCENT GREEN PASTE WB