application datasheet

application datasheet

Download sheet in pdf

KW634 - SMALTO A PENNELLO OPACO ALL''ACQUA

View Product Shelf Life

FIELD OF APPLICATION:

Decorative enamel for DIY sector, furniture, fixtures, metal carpentry, etc. Can be applied to both wood and metal (iron) after careful selection of the appropriate type of primer.

RECOMMENDED PRIMER:

Quick-drying one-component water-based acrylic or synthetic primers.

PREPARATION OF THE SUBSTRATE:

Iron surfaces: Thoroughly remove all traces of rust, calamine, grease and moisture. Old paints with poor adhesion should be removed by sanding. Apply one or two coats of primer (our 494WR7035). After about 24 hours, apply the brush-on water-based enamel finish. Wood surfaces: On new wood, apply one or two coats of polyurethane primer or other suitable primer. After the primer dries, sand thoroughly with sandpaper and then apply one or two coats of finishing varnish.

PREPARATION OF THE PRODUCT:

Mix until the color and consistency are uniform. By brush/roller: dilute with 5%-10% water. By spray: dilute with 15-25% water.

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Brush enamel 1K

APPEARANCE

Matt

COLOUR

On request

SPECIFIC WEIGHT

1,03 Kg/Lt (± 0,05)

SUPPLY VISCOSITY

24” (± 3) DIN 8 at 20 °C SOLID % - VOLUME 39% (± 2) SOLID % - WEIGHT 47% (± 2)

DRYING TIME AT 20°C

40% (± 1) - Dry dust-free - Print-free: 4-5 hours. 20’ - 30’   Print-free 3 - 4 hours   Complete curing after about 24 - 36 hours   Forced drying 30’ - 40’ at 60 - 70 °C

RECOMMENDED LAYERS

2

RECOMMENDED - DFT

40 - 50 µm

THEORETICAL YIELD (1)

7,7 m2/Lt or 6,7 m2/Kg at 50 µm dry (1) In 80/20 ratio with PW900.

APPLICATION INSTRUCTIONS:

View pictograms Page 1.

RECOATING:

After at least 24 hours.

SAFETY REGULATIONS:

Water-based products must be protected from frost. Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

In a dry place out of sunlight and in unopened and sealed packages, kept at a temperature of +10 to +30 °C. Rev.: 01/24 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.

Other products in TINTOMETRO E PRODOTTI ALL’ACQUA

 > WATER-BASED TINTERS

KW731

WATER-BASED DTM GLOSS ACRYLIC

PW010

NETRUAL WB PASTE

PW050

MATTING AGENT WB PASTE

PW100

BLACK WB PASTE

PW110

OXIDE YELLOW WB PASTE

PW115

LEMON YELLOW WB PASTE

PW119

MEDIUM YELLOW WB PASTE

PW166

DEEP BLACK WB

PW200

ORANGE WB PASTE

PW303

BRIGHT RED WB PASTE

PW305

DARK RED WB PASTE

PW330

OXIDE RED WB PASTE

PW400

VIOLET WB PASTE

PW500

BLUE WB PASTE

PW600

GREEN WB PASTE

PW701

FINE ALUMINIUM WB PASTE

PW703

PASTA ALLUMINIO MAGNUM WB

PW900

WHITE WB PASTE

 > WATER-BASED TEXTURE TINTERS

PWTX50

FINE-GRAINED TEXTURE WB PASTE

PWTX70

MEDIUM-GRAINED TEXTURE WB PASTE

PWTX80

COARSE-GRAINED TEXTURE WB PASTE

PWTX90

EXTRA COARSE-GRAINED TEXTURE WB PASTE

 > WATER-BASED PEARLY TINTERS

PW801

PEARLY MEDIUM WB PASTE

PW805

PEARLY SHOT GOLD WB PASTE

PW825

PEARLY SHOT BLUE WB PASTE

PW836

PEARLY GOLD OLYMPIC WB PASTE

 > WATER-BASED BINDERS

KW111

EPOLAK GLOSS WATER-BASED

Leghe Metallo Vetro

KW112

EPOLAK SEMI-GLOSS WATER BASED

Leghe Metallo Vetro

KW162

EPOLAK EMBOSSED SEMI-GLOSS WATER-BASED

Leghe Metallo Vetro

KW193

EPOFLEX WATER-BASED

Leghe Metallo Plastica Vetro

KW374

WATER-BASED BASE COAT BINDER

Plastica

KW431

ONE COAT 1K WATER BASED

Leghe Metallo Vetro

KW494

SINTOFLEX WATER-BASED

Metallo

KW631

WATER-BASED GLOSS BRUSH ENAMEL

Leghe Metallo Vetro

KW644

MICALUX BRUSH WATER-BASED

Leghe Metallo Vetro

KW711

Water-based Extra Gloss Acrylic

KW721

WATER-BASED GLOSS ACRYLIC

Leghe Metallo Plastica Vetro

KW723

WATER-BASED SEMI-GLOSS ACRYLIC

Leghe Metallo Plastica Vetro

KW734

WATER-BASED DTM MATT ACRYLIC

 > WATER-BASED FLUORESCENT TINTERS

PWF115

FLUORESCENT YELLOW PASTE WB

PWF300

FLUORESCENT RED PASTE WB

PWF400

FLUORESCENT PINK PASTE WB

PWF600

FLUORESCENT GREEN PASTE WB