KW431 - MANOUNICA MONOCOMP. ALL''ACQUA

View Product Shelf Life

FIELD OF APPLICATION:

Single coat product for general use, metal carpentry, agricultural machinery, metal furniture.

Single coat product for general use, metal carpentry, agricultural machinery, metal furniture, machine tools.

PREPARATION OF THE SUBSTRATE:

Iron surfaces: Careful mechanical sanding followed by degreasing with aqueous solutions or organic solvents. Aluminum: The product has good adhesion only on chromed and phosphochromed aluminum. For substrates or products to be exposed outdoors, a coat of 494W series or 193W series primer is recommended.

RECOMMENDED PRIMERS:

See in substrate preparation

PREPARATION OF THE PRODUCT:

Mix thoroughly until the color and consistency are uniform. Dilute, depending on the system and application conditions, with water to desired viscosity.

PREPARATION OF THE SUBSTRATE:

Iron surfaces: Careful mechanical sanding followed by degreasing with aqueous solutions or organic solvents. Aluminum: The product has good adhesion only on chromed and phosphochromed aluminum. For substrates or products to be exposed outdoors, a coat of 494W series or 193W series primer is recommended.

PRODUCT SPECIFICATIONS:

PREPARATION OF THE PRODUCT:

Mix thoroughly until the color and consistency are uniform. Dilute, depending on the system and application conditions, with water to desired viscosity.

TYPE OF PRODUCT

Single-component.

PRODUCT SPECIFICATIONS:

APPEARANCE OF THE FILM

Semigloss 80 GLOSS

TYPE OF PRODUCT

One-coat 1K WB

COLORS

By choice

APPEARANCE OF THE FILM

Semigloss

SPECIFIC WEIGHT

0,97 Kg/l (± 0,05)

COLORS

By choice

SUPPLY VISCOSITY

24” FORD 8 at 25 °C

SPECIFIC WEIGHT

0,97 Kg/l (± 0,05)

DRY RESIDUE

37% (± 2%)

SUPPLY VISCOSITY

134” (±6) DIN 8 at 25 °C

DRYING

Dry dust-free - Print-free: 4-5 hours. 20’ – 30’ at 20 °C   - Print-free 5 - 6 hours at 20 °C   - Forced Drying 30’ - 40’ at 60 °C - 70 °C

BRILLIANCE

75 (± 5) gloss SOLID % - VOLUME 39% (± 2%) SOLID % - WEIGHT 37% (± 2%)

RECOMMENDED LAYERS

One/two coats

DRYING AT 20°C

Dry dust-free - Print-free: 4-5 hours. 20’ – 30’   - Touch-free 5 - 6 hours   - Forced Drying 30’ - 40’ at 60 °C - 70 °C

RECOMMENDED THICKNESS

40 - 60 µm

RECOMMENDED LAYERS

One/two coats

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

RECOMMENDED - DFT

40 - 60 µm

THEORETICAL YIELD (*)

8,1 m2/lt or 7,5 m2/kg at 50 µm dry

STORAGE CONDITIONS:

The storage room should be dry, out of sunlight and with a temperature between +10 °C and +35 °C. Rev.: 09/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

RECOATING

Wet-on-wet or max within 2 hours at 20 °C (*) In 80/20 ratio with PW900.

APPLICATION INSTRUCTIONS:

View pictograms Page 1.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

The storage room should be dry, out of sunlight and with a temperature between +10 °C and +35 °C. Rev.: 09/24 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.