KW374 - RESINA PER BASI OPACHE ALL''ACQUA

FIELD OF APPLICATION:

Suitable for painting industrial products in general or bodywork vehicles, both automotive and industrial.

PREPARATION OF THE SUBSTRATE:

The matte base coat can be applied over epoxy, 2K acrylic, both water-based and solvent-based primers, properly sanded and degreased.

PREPARATION OF THE PRODUCT:

The product should be applied by spraying, and optimal conditions are an average ambient temperature of 15 to 25 °C, with relative humidity less than 60% Comp. A KW374 + PW Water-based Tinters 100 Parts by weight Diluent Water 10 – 20 Parts by weight

PRODUCT SPECIFICATIONS:

TYPE OF PRODUCT

Single-component.

APPEARANCE OF THE FILM

Matte.

COLORS

On request

SPECIFIC WEIGHT

0,98 Kg/Lt (± 0,05)

DRY RESIDUE

21% (± 2).

DRYING

Dry dust-free - Print-free: 4-5 hours. 10’ - 15’ at 20 °C.   Forced Drying 5’ - 10’ at 40 - 60 °C.

RECOMMENDED LAYERS

Two coats N.B. Before applying the clear coat, wait 20 to 25 minutes at room temperature (20 °C) or 5 to 10 minutes at 40 to 60 °C.

SAFETY REGULATIONS:

Strictly follow the instructions on the labeling and in the safety data sheet.

STORAGE CONDITIONS:

In unopened and sealed packages, kept at a temperature of +5 to +30 °C. Rev.: 03/22 The data and information contained in this sheet are the result of our experience and accurate laboratory tests. However, since the painting process represents a set of operations that are beyond our control, they do not therefore guarantee, in any way, the final performance of the cycle.

The data and information contained in this sheet are the result of our experience and accurate tests and laboratory tests.
However, since the painting process is a set of operations that are beyond our control, they therefore do not constitute, in any way any form of guarantee on the final performance of the cycle itself.